Ku-sama Posted November 13, 2007 Report Share Posted November 13, 2007 (edited) I'm re offering really cheap boxes. You pay for me to buy the supplies and shipping, I build the box for FREE. Keep in mind, these are sealed, L ported, or PVC ported. I can't glass worth crap and I can't design super complex boxes. Free labor boxes include: Countersunk screws Options that cost more are: Carpet/paint 45's in the port/corners Resined Inside Internal Bracing Flush Mounted Subs PVC Ports Refs I have are on CAF: Sold to: BAD_MAYHEM, Grinder1989 Bought from: KrisFnBZ, 95BlackGA, nismos14 Traded with: Fargof ent3rdadragon bought a box off of me. Let me know. my most recent work (I used screws that were too big, but I found my sweetspot in size now, so no more split wood: and it beating the crap out of my truck: Edited November 13, 2007 by Ku-sama 225HP 1996 S-Dime JVC KD-G820 Crunch PZi 2250 powering Two Ascendant Audio Assassin 8s wired to 2 ohm at 225W RMS 2.26CF @ 36.4Hz 43.5 square inches of port with 45's Kicker ZX350.4 powering CDT CL-61A's with TW-24 Tweeters Contact me: AIM: Necromancer Ku YIM: Ku_Karukasa MSN: [email protected] Link to comment Share on other sites More sharing options...
Coolwazabi Posted November 13, 2007 Report Share Posted November 13, 2007 who makes the designs ? Link to comment Share on other sites More sharing options...
Ku-sama Posted November 13, 2007 Author Report Share Posted November 13, 2007 who makes the designs ? I'd be using RE's box calculator and for PVC ports I'd be using WinISD for it. I'm in York PA 225HP 1996 S-Dime JVC KD-G820 Crunch PZi 2250 powering Two Ascendant Audio Assassin 8s wired to 2 ohm at 225W RMS 2.26CF @ 36.4Hz 43.5 square inches of port with 45's Kicker ZX350.4 powering CDT CL-61A's with TW-24 Tweeters Contact me: AIM: Necromancer Ku YIM: Ku_Karukasa MSN: [email protected] Link to comment Share on other sites More sharing options...
cartunez2004 Posted November 13, 2007 Report Share Posted November 13, 2007 so............. i was thinking of doing a wall in my truck (98 jimmy) u interested in helping/build one let me know thanks bro new toy 97 chevy s10 ext cab bagged 22s system (coming soon ) 4 soundstream t4-15s walled 2 concept 2410 mono amps REFS http://www.stevemeadedesigns.com/board/ind...hl=cartunez2004 http://caraudio.com/forum/showthread.php?t...ht=LOUDCARTUNEZ Link to comment Share on other sites More sharing options...
Ku-sama Posted November 13, 2007 Author Report Share Posted November 13, 2007 so............. i was thinking of doing a wall in my truck (98 jimmy) u interested in helping/build one let me know thanks bro sure. when are you trying to do it? if you have an instant messenger, hit me up, it's all in my sig 225HP 1996 S-Dime JVC KD-G820 Crunch PZi 2250 powering Two Ascendant Audio Assassin 8s wired to 2 ohm at 225W RMS 2.26CF @ 36.4Hz 43.5 square inches of port with 45's Kicker ZX350.4 powering CDT CL-61A's with TW-24 Tweeters Contact me: AIM: Necromancer Ku YIM: Ku_Karukasa MSN: [email protected] Link to comment Share on other sites More sharing options...
cartunez2004 Posted November 14, 2007 Report Share Posted November 14, 2007 i just pm u my number hiy me up anytime new toy 97 chevy s10 ext cab bagged 22s system (coming soon ) 4 soundstream t4-15s walled 2 concept 2410 mono amps REFS http://www.stevemeadedesigns.com/board/ind...hl=cartunez2004 http://caraudio.com/forum/showthread.php?t...ht=LOUDCARTUNEZ Link to comment Share on other sites More sharing options...
mrwigglezdj Posted November 14, 2007 Report Share Posted November 14, 2007 i wouldnt do if for free bro, charge atleast $30 for the trouble of doing it Americas loudest work van2006 iasca heavyweight bassboxing champion at 150.4 db with 60second average TL8 memphis PR15s,12 memphis PR6.5's coax,4 memphis PR 1inch tweets Link to comment Share on other sites More sharing options...
Amalan Posted November 14, 2007 Report Share Posted November 14, 2007 (edited) cant tell if this is an act of kindness or youre just really bored Edited November 14, 2007 by Amalan Link to comment Share on other sites More sharing options...
Ku-sama Posted November 14, 2007 Author Report Share Posted November 14, 2007 i just pm u my number hiy me up anytime I'll give you a call tomorrow. i wouldnt do if for free bro, charge atleast $30 for the trouble of doing it I need to start somewhere. cant tell if this is an act of kindness or youre just really bored both. I know some people wouldn't mind a good quality box for the same if not less then a prefab. I don't have a workshop, but I'm hoping with the side options I might be able to scrap something together such as routers and clamps and a table saw eventually. 225HP 1996 S-Dime JVC KD-G820 Crunch PZi 2250 powering Two Ascendant Audio Assassin 8s wired to 2 ohm at 225W RMS 2.26CF @ 36.4Hz 43.5 square inches of port with 45's Kicker ZX350.4 powering CDT CL-61A's with TW-24 Tweeters Contact me: AIM: Necromancer Ku YIM: Ku_Karukasa MSN: [email protected] Link to comment Share on other sites More sharing options...
Ku-sama Posted November 24, 2007 Author Report Share Posted November 24, 2007 building two boxes this week. one for a 15" Brahma and a second for two 15" L7's. 225HP 1996 S-Dime JVC KD-G820 Crunch PZi 2250 powering Two Ascendant Audio Assassin 8s wired to 2 ohm at 225W RMS 2.26CF @ 36.4Hz 43.5 square inches of port with 45's Kicker ZX350.4 powering CDT CL-61A's with TW-24 Tweeters Contact me: AIM: Necromancer Ku YIM: Ku_Karukasa MSN: [email protected] Link to comment Share on other sites More sharing options...
Recommended Posts