varietyguy Posted December 6, 2011 Author Report Posted December 6, 2011 Dual inputs for the sundowns. and new terminals, After some thinking I probably wont use these but I'll do some testing to see if there is a voltage drop first. 1992 Mazda 323 http://www.stevemead...323-wall-build/
varietyguy Posted December 7, 2011 Author Report Posted December 7, 2011 not too many pictures today but the front part of the wall is finished and completely sealed off. 1992 Mazda 323 http://www.stevemead...323-wall-build/
I am Poncho Posted December 7, 2011 Report Posted December 7, 2011 sexy :popcorn: OLD BUILD LOG: http://www.stevemeadedesigns.com/board/topic/166273-poncho-designs-trailblazer/ New car, new build coming soon...
evermaxx Posted December 7, 2011 Report Posted December 7, 2011 thats sexy Team Subsonic Lows Get your garbage EMF products of my amp bitch Man....it makes a nice work bench
varietyguy Posted December 7, 2011 Author Report Posted December 7, 2011 thanks guys. The original plan was to have the trim above and below the subs protruded from the wall but for ease and performance we did this. Might change it later. Hopefully it will be done by Sat then I'll get some vids up. 1992 Mazda 323 http://www.stevemead...323-wall-build/
varietyguy Posted December 8, 2011 Author Report Posted December 8, 2011 not a lot done today. but did black out the side windows. still need to do the back hatch. 1992 Mazda 323 http://www.stevemead...323-wall-build/
varietyguy Posted December 8, 2011 Author Report Posted December 8, 2011 I'm accepting all critisism, good and bad. This is my first wall build so go easy. 1992 Mazda 323 http://www.stevemead...323-wall-build/
getlocivic Posted December 8, 2011 Report Posted December 8, 2011 soo 7.4 cubes with 36" of port... uhhhhhh id say fail on that part... hell 12 to 16" per is general other than that i like the equipment n car..
varietyguy Posted December 8, 2011 Author Report Posted December 8, 2011 sorry i guess i didn't update it. final box dimensions are 9.18 cu ft with 110 cu inches of port tuned to 36 hz 1992 Mazda 323 http://www.stevemead...323-wall-build/
getlocivic Posted December 8, 2011 Report Posted December 8, 2011 thats still only about 11inchs per cube.. right around the same port area as a prefabbed box.. let them babies get down with about 15" per
Recommended Posts
Archived
This topic is now archived and is closed to further replies.