JRminivan Posted December 4, 2011 Report Share Posted December 4, 2011 (edited) I just picked up a Alpine MRD-M1000 mono block for $100 today and need help setting it up. I downloaded the manual offline but its not very help full. Its pushing 2 Earthquake DBX10 in a ported box. Each dbx is in a 1.75cu.ft tuned at 33 hertz. Also my deck pre-out are 2 volts. Here what I got so far from what I was able to find online 1-1 Input : 2ch 1-2 Input Level : 0db (what is this used for) 1-3 Gain Factor : 6db 2-1 LP On\Off :On 2-2 Frequency :80hz 3-1 Subsonic On/Off :On 3-2 Frequency :25hz 4-1 Parametric EQ On\Off 4-2 Frequency : 4-3 Width Q. : 4-4 Level : 5-1 Bass Compensation On\Off 5-2 Mode :N\A 6-1 Time Compensation On\Off 6-2 Delay Time :N\A 7-1 Phase :0\180 8-1 Amp Set ID No. :1 8-2 Time Of Delay :1.0 9-1 Output Disable :Off 0-1 Memory Write :Hopefully Correct Settings!! 0-2 Memory Read :Hopefully Correct Settings!! Any help would be great, thanks Edited December 4, 2011 by JRminivan Quote Link to comment Share on other sites More sharing options...
JRminivan Posted December 5, 2011 Author Report Share Posted December 5, 2011 bump Quote Link to comment Share on other sites More sharing options...
JesseyMclame Posted December 5, 2011 Report Share Posted December 5, 2011 So what do you need help with .. ? Quote Current setup in my 96 Hoe Hu - Pioneer DEH-80prs. Amps - (4) Crossfire C5 1700D's, MTX Thunder 5604(mids), PPI Art 300.2 (tweets) Batts - 4 91ah rear batts, 50ah batt up front. Subs - 2 Crossfire XSv2 18's Alt - Singer 330A Front stage - Random JL & Eclipse mids, Eclipse tweets Link to comment Share on other sites More sharing options...
Punkeyboozter Posted December 5, 2011 Report Share Posted December 5, 2011 what help do you need? Setting the gains wiring? Quote Loudness is no substitute for musicianship, and partial deafness is no badge of honor. I was once able to hear this advice. Build Log>>> http://www.stevemeadedesigns.com/board/ind...pid=672024& New Build Believe in the order Link to comment Share on other sites More sharing options...
JRminivan Posted December 5, 2011 Author Report Share Posted December 5, 2011 setting the gains, sorry, I downloaded the manual but it doesn't explain much and the settings and what they do. Like the input gain goes from 0db to -24db but not sure on what its used for. Parametric EQ, Bass Compensation should I use them? Quote Link to comment Share on other sites More sharing options...
JRminivan Posted December 5, 2011 Author Report Share Posted December 5, 2011 (edited) ok so what I was able to find online is Parametric EQ is bass boost I could leave this off and just use my deck for bass boost. Right? Input level is for your pre out from your deck, I have 2 volts rca out so what should this be at? I have it at default 0db. Please correct me if I'm wrong. Edited December 5, 2011 by JRminivan Quote Link to comment Share on other sites More sharing options...
MIKE-2U Posted February 1, 2012 Report Share Posted February 1, 2012 when i had that amp i had the LP filter at around 80. subsonic was 1/4 the way (32hz) gain i had 5/8 but gain should be set properly . Quote 2006 Jeep Grand Cherokee LaredoPioneer AVH- 3200DVD2/0 Flex-A-Prene Welding Cable (2) Fully Loaded Fi Sp4's dual 1-------> My YouTube Channel <------- Needs more power those woofers will laugh at that turd Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.