Wassalla Posted January 15, 2012 Report Posted January 15, 2012 Had my amp hooked to my dc level 3 running at 1ohm and all of the sudden it went into protect mode and now won't come out of ?!?!?
bkolfo4 Posted January 15, 2012 Report Posted January 15, 2012 If you disconnect the speaker wires at the amp, let the amp fully cool, make sure you have good voltage and a good ground, and it is still in protect, it may be time for amp repair. . . Current system: 1997 Blazer - (4) Customer Fi NEO subs with (8) American Bass Elite 2800.1s Previous systems: 2000 Suburban - (4) BTL 15's and (4) IA 40.1's = 157.7 dB at 37 Hz. 1992 Astro Van - (6) BTL 15's and (6) IA 40.1's = 159.7 dB at 43 Hz.
Wassalla Posted January 15, 2012 Author Report Posted January 15, 2012 Okay well it still has a warranty on it, but its to get fixed and not replace and they said its at least 2 months which sucks, but I might just buy an aq750 and sell the n2 when its fixed to a buddy
Recommended Posts
Archived
This topic is now archived and is closed to further replies.