Migz Posted February 17, 2012 Author Report Share Posted February 17, 2012 if nothing is obviously burned then you need to check the RCA connectors to make sure the solder joints are not cracked. I don't think anything is cracked as i didn't see any dodgy solder joints and i think i wouldn't have measured 1.3v on them if they werent attatched to anything. Quote Link to comment Share on other sites More sharing options...
STEvil Posted February 18, 2012 Report Share Posted February 18, 2012 did you follow them on the board a ways? If you get 1.3v on their backside that only means there's power coming into them, not necessarily getting to the PCB. Quote MickyMcD - "Capable of making some serious trouser flapping volumes at where's-my-testicles frequencies, the Servo-Drives used to be fairly jaw dropping..." Any time you have have a power wire next to your frame put some rubber hosing (or cut up an innertube) around it. The wire is bound to wiggle (due to driving or flex) and the casing will eventually wear through. Hammerdown... 1% no links to outside websites, business related FB/YT pages allowed. Link to comment Share on other sites More sharing options...
Migz Posted February 19, 2012 Author Report Share Posted February 19, 2012 I didn't't have any RCA's from anything plugged in though, so it was getting 1.3v from somewhere inside the amplifier. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.