CleanSierra Posted March 27, 2012 Report Share Posted March 27, 2012 I don't know if a WALL is a good idea for a first system. Maybe you should start with an under window line design first and see what all that entails. Also, is your truck capable of being set up for twin alternators? If not, you're very limited on the type of system you can get in there. Takes a lot of power to do what you're wanting. Shit, with a welder you can do as many alt's as your want. Only problem is space and power of the motor Room for alternators and said bracket are the issue with the Ridgeline. I'll be stoked as hell to see how this thing come together. If you don't have the space to make power however, you're gonna have a hard time spending power for any length of time. Assuming an amp efficiency of 75% and a voltage of an even 14 volts, those amps will pull over 650 amps at full tilt. That's a LOTTTT of draw. Quote Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
drome20 Posted March 27, 2012 Author Report Share Posted March 27, 2012 well normal listening should be fine right? only time id see alot of drop is like comps or demos? Quote AA Mayhem 18's aq 3500's x2 Honda Ridgeline wall build! http://www.stevemeadedesigns.com/board/topic/138286-honda-ridgeline-wall-build/page__st__40 Link to comment Share on other sites More sharing options...
drome20 Posted March 29, 2012 Author Report Share Posted March 29, 2012 build log as promised http://www.stevemeadedesigns.com/board/topic/138286-honda-ridgeline-wall-build/ Quote AA Mayhem 18's aq 3500's x2 Honda Ridgeline wall build! http://www.stevemeadedesigns.com/board/topic/138286-honda-ridgeline-wall-build/page__st__40 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.