teddyspl42 Posted April 3, 2012 Report Share Posted April 3, 2012 ok so i wasnt exactly sure where to post this, but this said exterior so i figured this would work. the underbody of my 95 jeep cherokee is rusting out, there is one big hole in the driver floor panel, and under the plastic by the hatch is rusting out, can i fix this, or should i just find another body? Quote Car: 1995 Jeep XJ Cherokee Sport 4.0L (2wd) Headunit: Pioneer AVH-P5000dvd Front Doors: blown stock Rear Doors: blown stock High amp: none (for now) Subs: 12" Kicker L7 D4 Sub amp: JL Audio 500/1v2 Wiring: Stinger Pro Speaker wire: Stinger 12g Link to comment Share on other sites More sharing options...
blownengine Posted April 3, 2012 Report Share Posted April 3, 2012 If you are serious about repairing it then you will need to weld in patch panels. If it's that bad then chances are it's a common problem and someone will offer a custom stamped patch. Quote 2003 Dodge Ram 1500 SLT (Yea its got a Hemi)Alpine CDA-105KnuKonceptz 0ga CCA Big 3 with Yellow Top 15" SoundQubed HDC3DC Audio 1.2K (Bass)Pioneer 6x9's (Front)Pioneer 6.5's (Rear)Kicker 3.5's (Dash)Sony amp on the highs. (Hey it was free) Link to comment Share on other sites More sharing options...
trpkkd Posted April 4, 2012 Report Share Posted April 4, 2012 Just depends how much time and money your willing to invest and if it's worth it to you or not. If's its worth it to you I say go for it I like a good challenge myself. Quote Link to comment Share on other sites More sharing options...
teddyspl42 Posted April 4, 2012 Author Report Share Posted April 4, 2012 well do you guys know what it would cost? ive never had this problem, my last car was an 03 saturn, which isnt much metal Quote Car: 1995 Jeep XJ Cherokee Sport 4.0L (2wd) Headunit: Pioneer AVH-P5000dvd Front Doors: blown stock Rear Doors: blown stock High amp: none (for now) Subs: 12" Kicker L7 D4 Sub amp: JL Audio 500/1v2 Wiring: Stinger Pro Speaker wire: Stinger 12g Link to comment Share on other sites More sharing options...
trpkkd Posted April 4, 2012 Report Share Posted April 4, 2012 http://www.jcwhitney.com/cab-floor-repair-panels/p2010825.jcwx?filterid=d1163y1995c15280u0j4Found these on jc whitney I don't know exactly where your rust is but maybe this could help you and as far as other materials and tools it depends on what you already have because welders and stuff like that can get really pricey. Quote Link to comment Share on other sites More sharing options...
teddyspl42 Posted April 4, 2012 Author Report Share Posted April 4, 2012 welding shouldnt be a problem, my grandpa welds, and he would be more than happy to make my car safer, but that looks exactly like what i need, i can prolly just find some scrap metal for the back little shit. thanks a lot guys Quote Car: 1995 Jeep XJ Cherokee Sport 4.0L (2wd) Headunit: Pioneer AVH-P5000dvd Front Doors: blown stock Rear Doors: blown stock High amp: none (for now) Subs: 12" Kicker L7 D4 Sub amp: JL Audio 500/1v2 Wiring: Stinger Pro Speaker wire: Stinger 12g Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.