Dax Posted April 7, 2012 Report Share Posted April 7, 2012 As stated above the build will be slow because I am 18 and I have no job so no money for my many hobbies. The truck is happy Ignore the rust As with above ignore the rust Drivers dide door. There is a Power Acoustic mid behind the gray screen. There is the Power Acoustic tweeter And finally the crossover, and before you trolls start hating there is a reason there is no carpet, my windows don't seal the greatest so the carpet would get wet when it rained. So I took it out and I have plans to bedliner the entire floor as soon as i get enough cash to get some bedliner. The passenger side looks exacly the same, but the sun was at a bad angle so I couldn't get an pics. So on to the back seat. I just have stock speakers in the back. Time for the sub and box, please don't laugh. You see that weird bulge that is what wet carpet does to MDF. I painted the box today to try and hide the bulge a little so here is the painted box. It was my first time using a air compressor paint sprayer, so i put a little to much on in a few areas. And there it is in the back of my truck. And here is a pic of my headunit. I forgot to take a pic of the amp, but it is and MB Quart FX4.50 And here is a vid to not only display my mediocre audio abilities, but to show you that I absolutely fail with a video camera. Thanks for checking out my build, I will try to get some more work done to it. Let me know your sugestions, questions, criticism and as on any internet site hate of my project. Please keep the hate to a minimum, thanks. Quote The Midget Looks Into Your Soul 2008 Dodge am 3500HD with the 6.7 Cummins Race Me tuner, dpf deleted kenwood double din cheap walmart speakers for now(infinity reference comps comps coming soon) 2 kicker L5's in a ported box of unknown tuning lol(soon to be changed) Power acoustic 1500.1 on the subs (for now) Link to comment Share on other sites More sharing options...
01ExSport Posted April 7, 2012 Report Share Posted April 7, 2012 Haven't seen too many Broncos with leather. But nonetheless I'm curious as to how that bedliner on the floor turns out, and lots of potential in that thing! Quote Link to comment Share on other sites More sharing options...
Dax Posted April 7, 2012 Author Report Share Posted April 7, 2012 (edited) Its the eddiie bauer model, thats why it has leather. I also put a volt meter in, but i forgot to take pics. Edited April 7, 2012 by Dax Quote The Midget Looks Into Your Soul 2008 Dodge am 3500HD with the 6.7 Cummins Race Me tuner, dpf deleted kenwood double din cheap walmart speakers for now(infinity reference comps comps coming soon) 2 kicker L5's in a ported box of unknown tuning lol(soon to be changed) Power acoustic 1500.1 on the subs (for now) Link to comment Share on other sites More sharing options...
Dax Posted April 7, 2012 Author Report Share Posted April 7, 2012 I am thinking about designing and building a custom center console any ideas? Quote The Midget Looks Into Your Soul 2008 Dodge am 3500HD with the 6.7 Cummins Race Me tuner, dpf deleted kenwood double din cheap walmart speakers for now(infinity reference comps comps coming soon) 2 kicker L5's in a ported box of unknown tuning lol(soon to be changed) Power acoustic 1500.1 on the subs (for now) Link to comment Share on other sites More sharing options...
Dj_Scarface Posted April 9, 2012 Report Share Posted April 9, 2012 Kool a bronco just like mine... Check my sig for a link to my build log. Since you building a bronco this site will be your new best friend... http://broncograveyard.com/ Quote Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/ Link to comment Share on other sites More sharing options...
Dax Posted April 9, 2012 Author Report Share Posted April 9, 2012 Kool a bronco just like mine... Check my sig for a link to my build log. Since you building a bronco this site will be your new best friend... http://broncograveyard.com/ Yea i have checked out that site a few times, I have got big plans for this truck, I just need to get a job so i can start working on it. The first thing I wanna do is get a carburated v6, or small V8 to help my gas mileage, then body work, with audio thrown in there every now and then. Quote The Midget Looks Into Your Soul 2008 Dodge am 3500HD with the 6.7 Cummins Race Me tuner, dpf deleted kenwood double din cheap walmart speakers for now(infinity reference comps comps coming soon) 2 kicker L5's in a ported box of unknown tuning lol(soon to be changed) Power acoustic 1500.1 on the subs (for now) Link to comment Share on other sites More sharing options...
Dj_Scarface Posted April 9, 2012 Report Share Posted April 9, 2012 What kind of motor is in yours now?? I got the 5.0 EFI motor in mine, if you got the same motor I say keep because you can get all the 5.0 mustang supe up part from places like jegs Quote Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/ Link to comment Share on other sites More sharing options...
Dax Posted April 9, 2012 Author Report Share Posted April 9, 2012 I got the 5.8 gas sucker, and i can get more horsepower and tourque out of a carburated crate engine. Quote The Midget Looks Into Your Soul 2008 Dodge am 3500HD with the 6.7 Cummins Race Me tuner, dpf deleted kenwood double din cheap walmart speakers for now(infinity reference comps comps coming soon) 2 kicker L5's in a ported box of unknown tuning lol(soon to be changed) Power acoustic 1500.1 on the subs (for now) Link to comment Share on other sites More sharing options...
Dj_Scarface Posted April 9, 2012 Report Share Posted April 9, 2012 I got the 5.8 gas sucker, and i can get more horsepower and tourque out of a carburated crate engine. Ok you going that way with it... So you got planes to upgrade all the gears & links in the drive train or you got scrap every thing & build off what ever motor you end up getting?? Quote Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/ Link to comment Share on other sites More sharing options...
Dax Posted April 9, 2012 Author Report Share Posted April 9, 2012 If i can find a motor to bolt up to my stock transmission I won't have to scrap anything, but if i can't ill prolly get a drivetrain entirely. Quote The Midget Looks Into Your Soul 2008 Dodge am 3500HD with the 6.7 Cummins Race Me tuner, dpf deleted kenwood double din cheap walmart speakers for now(infinity reference comps comps coming soon) 2 kicker L5's in a ported box of unknown tuning lol(soon to be changed) Power acoustic 1500.1 on the subs (for now) Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.