Cameronmyers74 Posted April 11, 2012 Report Share Posted April 11, 2012 Okay so I plan on buying a 4 channel amp from JL and 2 mono block amps from JL now this 4 channel have doesn't have fuses so I would have to put either a fuse or a circuit breaker inline before the amp, well they say to use a 50 amp fuses will it hurt the amp if I use a 40 amp fuse?? here's the link(http://www.jlaudio.com/jx360-4-car-audio-jx-amplifiers-99395) And on the two mono block jl amps they require a 30A fuse, and its the same concept you will have to use an inline fuse before the amp, now if I use a 40 amp fuse inline will it hurt the amp? and also here's the link(http://www.jlaudio.com/jx250-1-car-audio-jx-amplifiers-99398) Any help would be appreciated. Quote Link to comment Share on other sites More sharing options...
Bump4life Posted April 11, 2012 Report Share Posted April 11, 2012 (edited) use what they say. 50 amp fuse for 4 channel 30 a for each mono block inline fuses btw Edited April 11, 2012 by Bump4life Quote Buyer/Seller Feedback Thread: http://www.stevemead...5015-bump4life/ MB C220 153 Trunk Car Build Log: http://www.stevemead...d/#entry1840136 MB C280 Ipad Dash SQ Build Log: http://www.stevemeadedesigns.com/board/topic/194484-bump4lifes-new-benz-tony-c-relay-kit-pictures-ce-electric-audison-front-stage-installed/ My SPL Log: http://www.stevemead...__fromsearch__1 BMW M340 xDrive Stock, for now. Corner Load 10" maybe soon. But does 10s in the 1/4... Best Scores out of a trunk 153.0 sealed legal full tilt clamped 5524 @ 42 hz 154+ windows down, 155+ kick Link to comment Share on other sites More sharing options...
Cameronmyers74 Posted April 11, 2012 Author Report Share Posted April 11, 2012 I stated the use of inline fuses, and when I was on sonicelctrnox I was having finding 30 and 50 amp fuses Quote Link to comment Share on other sites More sharing options...
Bump4life Posted April 11, 2012 Report Share Posted April 11, 2012 buy from darvex.com or knukonceptz.com. they have all your electrical needs Quote Buyer/Seller Feedback Thread: http://www.stevemead...5015-bump4life/ MB C220 153 Trunk Car Build Log: http://www.stevemead...d/#entry1840136 MB C280 Ipad Dash SQ Build Log: http://www.stevemeadedesigns.com/board/topic/194484-bump4lifes-new-benz-tony-c-relay-kit-pictures-ce-electric-audison-front-stage-installed/ My SPL Log: http://www.stevemead...__fromsearch__1 BMW M340 xDrive Stock, for now. Corner Load 10" maybe soon. But does 10s in the 1/4... Best Scores out of a trunk 153.0 sealed legal full tilt clamped 5524 @ 42 hz 154+ windows down, 155+ kick Link to comment Share on other sites More sharing options...
Chally Posted April 11, 2012 Report Share Posted April 11, 2012 You might have to use AGU fuses. like these http://www.sonicelectronix.com/item_39062_Xscorpion-AGU50PL.html . Quote Link to comment Share on other sites More sharing options...
Bump4life Posted April 11, 2012 Report Share Posted April 11, 2012 You might have to use AGU fuses. like these http://www.sonicelec...on-AGU50PL.html . no man. he can use what ever fuses he wants. those amps dont have any fuses on them or at least user accesible. so all you need is one inline fuse per amp. can me mini anl anl or what ever Quote Buyer/Seller Feedback Thread: http://www.stevemead...5015-bump4life/ MB C220 153 Trunk Car Build Log: http://www.stevemead...d/#entry1840136 MB C280 Ipad Dash SQ Build Log: http://www.stevemeadedesigns.com/board/topic/194484-bump4lifes-new-benz-tony-c-relay-kit-pictures-ce-electric-audison-front-stage-installed/ My SPL Log: http://www.stevemead...__fromsearch__1 BMW M340 xDrive Stock, for now. Corner Load 10" maybe soon. But does 10s in the 1/4... Best Scores out of a trunk 153.0 sealed legal full tilt clamped 5524 @ 42 hz 154+ windows down, 155+ kick Link to comment Share on other sites More sharing options...
Cameronmyers74 Posted April 11, 2012 Author Report Share Posted April 11, 2012 Well my origional idea was to use mini anl, or use a circuit breaker, but I will check those sites out, do they have wiring kits?? Quote Link to comment Share on other sites More sharing options...
Bump4life Posted April 11, 2012 Report Share Posted April 11, 2012 Well my origional idea was to use mini anl, or use a circuit breaker, but I will check those sites out, do they have wiring kits?? i mean for the power you are running you really should only need one run of 4 gauge OFC to the back maybe 1 run of 0 gauge CCA to a distribution block. then just fuse at distribution block. mini anl should do well. and yes they have wiring kits Quote Buyer/Seller Feedback Thread: http://www.stevemead...5015-bump4life/ MB C220 153 Trunk Car Build Log: http://www.stevemead...d/#entry1840136 MB C280 Ipad Dash SQ Build Log: http://www.stevemeadedesigns.com/board/topic/194484-bump4lifes-new-benz-tony-c-relay-kit-pictures-ce-electric-audison-front-stage-installed/ My SPL Log: http://www.stevemead...__fromsearch__1 BMW M340 xDrive Stock, for now. Corner Load 10" maybe soon. But does 10s in the 1/4... Best Scores out of a trunk 153.0 sealed legal full tilt clamped 5524 @ 42 hz 154+ windows down, 155+ kick Link to comment Share on other sites More sharing options...
Cameronmyers74 Posted April 11, 2012 Author Report Share Posted April 11, 2012 My idea was to run 4 gauge to the back to a distribution block and then go to the amps, ans then run my grounds to a distribtuion ground block and then run the ground back to the battery as well Quote Link to comment Share on other sites More sharing options...
Bump4life Posted April 11, 2012 Report Share Posted April 11, 2012 My idea was to run 4 gauge to the back to a distribution block and then go to the amps, ans then run my grounds to a distribtuion ground block and then run the ground back to the battery as well excellent idea. and especially excellent idea for grounds. just make sure if you are using 4 gauge to get OFC 100% Quote Buyer/Seller Feedback Thread: http://www.stevemead...5015-bump4life/ MB C220 153 Trunk Car Build Log: http://www.stevemead...d/#entry1840136 MB C280 Ipad Dash SQ Build Log: http://www.stevemeadedesigns.com/board/topic/194484-bump4lifes-new-benz-tony-c-relay-kit-pictures-ce-electric-audison-front-stage-installed/ My SPL Log: http://www.stevemead...__fromsearch__1 BMW M340 xDrive Stock, for now. Corner Load 10" maybe soon. But does 10s in the 1/4... Best Scores out of a trunk 153.0 sealed legal full tilt clamped 5524 @ 42 hz 154+ windows down, 155+ kick Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.