WHY IS THE EP INDICATOR LIGHT ON ON MY AMP AND NO SOUND..

[SimonSezGoDwnBit]

HAVE AN ORION 2400 HOOKED UP TO A 12 L7 I JUST SWITCHED TO A PORTED BOX, TURN THE CAR ON AND THERES NO SOUND COMING THROUGH THE AMP AND THE EP INDICATOR LIGHT IS STAYING ON... IVE CHECKED MY 12V GROUND AND REMOTE WIRES AND THEY ARE ALL GOOD... HELP PLEASE... googled it and couldnt come up with anything

[SimonSezGoDwnBit]

esp indicator**

[Guest]

that light staying on means normal operation, according to this manual http://www.directedd...%2805-06%29.pdf

did you wire the sub to the amp?

are you sure you have ALL speaker wires connected where they have to go? did you accidentally hit the rca's when moving the box?

Edited April 21, 2012 by Kranny

[n8ball2013]

when illuminated (yellow) indicates ESP®

functionality and

is used to diagnose ESP®

features. The LED flash characteristics will assists in diagnosing the type of fault (see Appendix).

NOTE: The LED on top of the amplifier may also illuminate and flash with the ESP®

LED

indicator, if this option has been enabled by your installer (requires Bitwriter®

).

12. ESP®

Port - connection port for Bitwriter®

or ESP2 security system.

a little google and you too can be dangerous

[SimonSezGoDwnBit]

i googled it but all i came up was people with a flashing light and mine was solid so i figured id askk!!!! but i think i figured it out i took the sub out and pulled the box terminals and tightened them cause i noticed they were loose and viola it worked