New system almost doneish :D

[Guest]

nope i havent suggestions? i can fit 6.75s in the back...and custon drill a hole for tweeter. and 6x9's in the front(so 5.25 or ill cut the whole out to a 6.5) and tweeter also

What's your budget like for 2 sets of comps and a 4 channel?

this. i'd just do 6.5's all around though. would make for a more even sound imo.

edit: many many 6.5's come with 6x9 adapter plates

Edited April 24, 2012 by Kranny

[IBleedMusick]

nope i havent suggestions? i can fit 6.75s in the back...and custon drill a hole for tweeter. and 6x9's in the front(so 5.25 or ill cut the whole out to a 6.5) and tweeter also

What's your budget like for 2 sets of comps and a 4 channel?

this. i'd just do 6.5's all around though. would make for a more even sound imo.

edit: many many 6.5's come with 6x9 adapter plates

What he said and if not you can buy them from sonicelectronix.com they make an adapter plate from most sizes to 6.5". I would also do 6.5 comps all the way around but we need to know a budget before any advice can be given.

[Mikey Bates]

maybe around 100-125 per set and 300ish for the amp. 500 total would be awesome but shit i can break that if i buy them piece by piece and yes id like the same sets all the way around. the speakers will be light up blue with a plexi cover over them (still in factory door, but im going to mod the door and cut out the old plastic screen thing and put plexi in.

[Guest]

http://www.sonicelectronix.com/item_18207_Rockford-Fosgate-P1652-S.html

http://www.sonicelectronix.com/item_9102_Rockford-Fosgate-Power-T400-4-Black-Box.html

or

http://www.sonicelectronix.com/item_9893_Rockford-Fosgate-Punch-P400-4.html

or if you're feeling cheap

http://www.sonicelectronix.com/item_23877_MB-Quart-ONX4.60.html

idk if you can find those for cheaper on another site, i didn't check

[IBleedMusick]

With that and considering the equipment you're running I would honestly go with Skar Comp Sets http://www.stevemeadedesigns.com/board/topic/138450-skar-audio-vxi65-65-component-system-pre-order/ and run a Skar 85.4 http://www.soundsolutionsaudio.com/store/products/Skar-Audio-SK%252d85.4-4-Channel-Class-A%7B47%7DB-340W-Amplifier.html. Hit up Ryan or Kevin about ordering them all together from Skar. It would look good to be running all one brand.

[IBleedMusick]

http://www.sonicelec...te-P1652-S.html

http://www.sonicelec...-Black-Box.html

or

http://www.sonicelec...nch-P400-4.html

or if you're feeling cheap

http://www.sonicelec...rt-ONX4.60.html

idk if you can find those for cheaper on another site, i didn't check

Yeah the RF or Skar would be a good look.

[Guest]

i'd get an amp with double the power of the ones i listed if you plan on running those skars. hella power

[Mikey Bates]

yeah but the amp i just got is a concept ): Maybe later i'll upgrade to like a 4500.1 and some more vvx's idk or even a 1500.1 because then i'd be running all skar pretty. so on another note for the mids and highs. that skay amp is 85rms a channel. how loud is that? i mean ill be running about 750 rms of bass and right now i have 18rms a channel haha idk how well they would cut through??

[Mikey Bates]

what if i can two 85.4 and bridged them?? but then again the skar components dont handle that much :/

[IBleedMusick]

yeah but the amp i just got is a concept ): Maybe later i'll upgrade to like a 4500.1 and some more vvx's idk or even a 1500.1 because then i'd be running all skar pretty. so on another note for the mids and highs. that skay amp is 85rms a channel. how loud is that? i mean ill be running about 750 rms of bass and right now i have 18rms a channel haha idk how well they would cut through??

If you're running the concept amps than get 2 2 channels and 2 pairs of Skar comps. Aren't Ray's 2 channels 120x2? That would be perfect power and I am pretty sure even on the 85.4 Skar amp your comps will more than keep up with 750w rms.