97 jimmy build: 4 15" SSD's (batteries are in/Starting false floor)

[Nate Futuristic]

well got my lower intake gasket replace (4 hours to remove everything, 2-3 hours to clean off all the old gaskets,carbon build up and whatever else 7 cans of break cleaner and a few razor blades took off, about 1 hour to put the upper and lower back on to the clean heads and torque them, then a good 24 hours to let the RTV cure and the gasket to seat, and about 1 more hour hooking everything back up.... not including burping the coolant/oil change i did after lol but that took about a half hour)

so the build continues!!!!!!

thing on my list to get done this weekend!

false floor and battery bank!

3 runs of 1/0 under the truck (power and ground)

lay the 25 square feet of fat mat i have left down (front area of truck)

and possibly carpet most of the floor

possibly more but we will see how the weather turns out

i will get a video up of a few clips i took (edited together with my horrible skillz lol)

of the intake manifold job

[Nate Futuristic]

well i tried my best at making a intro to my videos and tried a few Video FX from my call of duty montage days for transitions.... and i came up with this lol

let me know what you think of the intro!

http://www.youtube.com/watch?v=XSvA7npJzVE

[dutchman-frans]

Doing a good job so far imo!

I like it that you do all the deathning before anything else.

I just recieved my first fi ssd 18", now have to save for the 2nd, first i'll get all the equipment and then buy a car

keep the vids and pics comming please!

[Nate Futuristic]

Doing a good job so far imo!

I like it that you do all the deathning before anything else.

I just recieved my first fi ssd 18", now have to save for the 2nd, first i'll get all the equipment and then buy a car

keep the vids and pics comming please!

Thanks!

Yeah I wanted to start from the bottom up (sound deadner first cuz I already knew it rattles like all hell)

[Nate Futuristic]

4 day weekend!!!! ill have updates coming all weekend!

should have the false floor done along with all the front fatmat down and finally got my carpet for the truck!

maybe a how-to video or two!

on a side note i had to return 50 feet of my 1/0 and ordered another 50 feet and more ring terminals

also got the new dayco belt and idler pulley in!

re-did my "big 3"

i wish all this stuff could just install its self

[Nate Futuristic]

small update... i did get the front carpet and seats back in...

waiting on my d925 (i-bars,i-bar adapters, and brass terminals) to come before i run the 1/0

gonna try to get the false floor done by friday :/

i really hate saying im going to do something and end up doing 5 other little projects lol (ADHD FTW)

http://www.youtube.com/watch?v=0tLwa1zOw3w

[Crandis16]

small update... i did get the front carpet and seats back in...

waiting on my d925 (i-bars,i-bar adapters, and brass terminals) to come before i run the 1/0

gonna try to get the false floor done by friday :/

i really hate saying im going to do something and end up doing 5 other little projects lol (ADHD FTW)

WHOA, same HU as me how do you like it?

tune in I'm taking notes on how I should do a false floor in my vehicle

Edit: tomorrow is friday.... so you better get back to

[Nate Futuristic]

small update... i did get the front carpet and seats back in...

waiting on my d925 (i-bars,i-bar adapters, and brass terminals) to come before i run the 1/0

gonna try to get the false floor done by friday :/

i really hate saying im going to do something and end up doing 5 other little projects lol (ADHD FTW)

WHOA, same HU as me how do you like it?

tune in I'm taking notes on how I should do a false floor in my vehicle

Edit: tomorrow is friday.... so you better get back to

haha yours is in WAY better shape then mine and i need to find a bezel for it... lol (like it alot better than the Dual deck i had even though that dual deck was top of the line for Dual LOL)

i work 14 hours today (about to leave) gonna take a quick video of the new carpet and center council (it turned out ok i guess could have been better but its a bass beater not a show car!)

and dont worry ill try to post as many steps of the false floor for you

[Crandis16]

haha yours is in WAY better shape then mine and i need to find a bezel for it... lol (like it alot better than the Dual deck i had even though that dual deck was top of the line for Dual LOL)

i work 1 hours today (about to leave) gonna take a quick video of the new carpet and center council (it turned out ok i guess could have been better but its a bass beater not a show car!)

and dont worry ill try to post as many steps of the false floor for you

Thanks, I really need baby steps on my first time lol. try contacting pioneer and see if you can buy something OEM off of them?

[Nate Futuristic]

haha yours is in WAY better shape then mine and i need to find a bezel for it... lol (like it alot better than the Dual deck i had even though that dual deck was top of the line for Dual LOL)

i work 1 hours today (about to leave) gonna take a quick video of the new carpet and center council (it turned out ok i guess could have been better but its a bass beater not a show car!)

and dont worry ill try to post as many steps of the false floor for you

Thanks, I really need baby steps on my first time lol. try contacting pioneer and see if you can buy something OEM off of them?

i really havent even looked... i may contact them and see if they can sell me a whole new faceplate and bezel cuz this one is scratched a bit

(i think crutchfield sold me a faceplate and bezel ill try them first)