SilveradoGoesBang Posted May 2, 2012 Report Share Posted May 2, 2012 I currently have 2 vvx 15s on a sk 1500.1 and am thinking about adding a second sk 1500.1 and a third vvx 15 they are dual 4's so i will have a final ohm load of 2.66. Im strapping the amps and im wondering if its a good idea to run those two amps strapped at 2.66 ohms or if i will not get alot of power out of them because of that ohm load / or what kind of power i can look to see from them at the load. thanks! "SilveradoGoesBang" http://www.stevemeadedesigns.com/board/topic/155256-silveradogoesbang-box-done-take-notes-on-bracing/ 2 FI BTL 18's CT Sounds 7k 2013 MidwestSPL Finals Xtreme 3 - 1st Place Link to comment Share on other sites More sharing options...
Brandonrcm Posted May 2, 2012 Report Share Posted May 2, 2012 Each amp would be seeing 1.33ohms so it wouldn't be bad but you still got rise to deal with Link to comment Share on other sites More sharing options...
SilveradoGoesBang Posted May 2, 2012 Author Report Share Posted May 2, 2012 Each amp would be seeing 1.33ohms so it wouldn't be bad but you still got rise to deal with Kk in a perfect world would I see more power "per sub" with 4 vvx at 2ohms or 3 at 2.66? "SilveradoGoesBang" http://www.stevemeadedesigns.com/board/topic/155256-silveradogoesbang-box-done-take-notes-on-bracing/ 2 FI BTL 18's CT Sounds 7k 2013 MidwestSPL Finals Xtreme 3 - 1st Place Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.