KOZ89 Posted May 17, 2012 Report Posted May 17, 2012 I have just connected about everything, to complete my system install, the only thing left out is the alternator which i'll get to tomorrow. Here's my problem sub DC lvl5 18" m2 1.4 dual, wired down to .7 ohms coming to the amp(AQ3500d.1) as follows After starting up the car, RCA's in, 2 fuses withing 18" of the amp, and a constant voltage for now sitting at 13.5 coming into the amp on both +'s until i get the alt replaced with the mechman, i am having an issue of the sub maybe not getting enough power because i haven't done the big 3 yet, when i test before starting car i am getting .7-.8ish at the terminals and at the amp, so no idea if the alt is not doing its job because its a stock 112 I've tried messing around with the subsonic and db filter putting it up to 30-40ish hertz and a db level of about 6ish. I haven't touched the Gains yet, its sitting at default which i think its 5v and could drop down to .5 not sure because it got dark and i had nothing but a cell phone light. Any help appreciated build coming late April, early May build log for 1 LVL 5 18" 87%ish done : http://www.stevemead...ab-dc-lvl-5-18/ 1997 Dodge Ram 1500 Slt Laramie Amplifier - AQ3500d.1 Sub - DC LVL 5 18" Highs - (2x) Selenium ST-350 Super Tweeters 8ohm Mids - Selenium 6" 200w midrange 6W4P (pair) Mids/Highs Amp - MB Quart ONX4.125 1000watt 4 ch Wiring - XP Flex 25' Red, 25' Black Alternator - Mechman 270amp Battery - XS power D3100, 1- Yellow top front more to come...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.