Mrop Posted June 3, 2015 Author Report Posted June 3, 2015 Thanks! I have trouble measuring the sealed sections tuning frequency.My impedance meter shows that the box seems to be a ported box, so i think that the port is already too small (read: i have no port on the ported side). I think i need to drill hole through the sealed section and put TL sensor inside it to find out the resonance freq of the sealed. Project continues with the doorpanels. www.peranurkka.net
db_speakerbox Posted June 3, 2015 Report Posted June 3, 2015 Door panels look crazy! If you have the ts parameters of the subs and know how many litres the sealed section is there is a formula you can use to calculate the Fb.
Mrop Posted June 3, 2015 Author Report Posted June 3, 2015 Impedance doors closed.Lowest Freq between the peaks is 53Hz and doors open its at 40-43Hz. here are drivers parameters. sealed section is ROUGHLY 450litres. www.peranurkka.net
Mrop Posted June 4, 2015 Author Report Posted June 4, 2015 Mids and high amps are in.Next... amp for subs www.peranurkka.net
Mrop Posted June 16, 2015 Author Report Posted June 16, 2015 Started to make my doorpanels I like my tweeterpods, ALOT www.peranurkka.net
Mrop Posted June 22, 2015 Author Report Posted June 22, 2015 Got first sounds!prety impressive frontend, 4th order starts from 25hz peaks at 36 (doors open) 48 (doors closed).did a little burp with 700W, 145,81dB @ 48Hz.Cannot play any louder in the neighborhood... www.peranurkka.net
Mrop Posted July 5, 2015 Author Report Posted July 5, 2015 First tests, first hairtrick ! www.peranurkka.net
Recommended Posts
Archived
This topic is now archived and is closed to further replies.