808BommerN702 Posted June 19, 2012 Report Posted June 19, 2012 Ok, got a factory HU that's connected to a PAC SOEM-T. Turn down the gains on the L&R channels on the LOC, and turned my HU all the way up but the DD-1 is not getting a 40Hz -0dB signal? The signal LED lights up but not the 40Hz. Then I turn the L&R gains on the LOC all the way up and sure enough DD-1 reads the signal. Best part is the Factory HU is turned to max. volume with absolutely NO distortion. Is this suppose to be ok/correct? Please Help! Quote
Noel989 Posted June 19, 2012 Report Posted June 19, 2012 Try it without the LOC and see where it distorts Quote Build Log - http://www.stevemead...-cruiser-el-pt/
808BommerN702 Posted June 19, 2012 Author Report Posted June 19, 2012 But wouldn't the LOC show distortion if the signal is going through it? idk, i'm so confused! Quote
Noel989 Posted June 19, 2012 Report Posted June 19, 2012 True Are your settings were their suppose to be eq flat and frequencies all the way Quote Build Log - http://www.stevemead...-cruiser-el-pt/
808BommerN702 Posted June 19, 2012 Author Report Posted June 19, 2012 ya, sure is. I didn't adjust the amp yet but the eq's and all are flat & turned off. weird, huh? Quote
Noel989 Posted June 19, 2012 Report Posted June 19, 2012 Yes it is What other settings does your LOC have? I've never used a LOC while using a dd-1 but I'll think it with you in case I ever run into one Quote Build Log - http://www.stevemead...-cruiser-el-pt/
808BommerN702 Posted June 19, 2012 Author Report Posted June 19, 2012 no other settings, just L&R gains. another funny thing is that with the LOC gains set max, the DD-1 wasn't picking up the 1kHz -0dB signal but showed that there was a signal. there's a twist. that's where i was like WTF!!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.