araarin Posted July 6, 2012 Report Posted July 6, 2012 Got a wall with 4 Lvl 3 15's it's around 13.6 cubes after displacement I was told I need around 210 to 240 square inches of port my question is how long should the port be the inner measurements of the wall is 43.25x32x17 and I'm chasing at least a 150 do you guys think its possible
Crandis16 Posted July 6, 2012 Report Posted July 6, 2012 AT LEAST 150??? you're how much power do you have? 150 isn't easy lol I think it's possible, but it would be easier to reach if you had a different level DC subs and the correct power My Red zx2 Build Log My Black zx2 Build Log My Red zx2 UBL
araarin Posted July 6, 2012 Author Report Posted July 6, 2012 I only have and Aq 2200d but I wanted to either grab another 2200 or go to the 3500 just trying to get the port right I want it to be tuned to about 34 or 35 hertz
TRTC360 Posted July 6, 2012 Report Posted July 6, 2012 150 shouldnt be all that hard with that much cone area, especially outlaw. '93 Firebird Formula V8 H/U- Kenwood eXcelon KDC-X395 Mids/Highs Amp- Hifonics ZXI80.4 Wiring-KNU RCA's, Speaker Wire, And Two Runs Of Trystar 1/0 G34 Red Top and a 180amp Ford Alternator www.youtube.com/TRTC360
Crandis16 Posted July 6, 2012 Report Posted July 6, 2012 Maybe tune a little lower for those 15's and you should definitely look into getting more power. If you're looking at the DC m2s then they're rated at 900wrms, so they would be underpowered from one Aq2200, what load will you be running them at? Edit: Welcome to the forum My Red zx2 Build Log My Black zx2 Build Log My Red zx2 UBL
araarin Posted July 6, 2012 Author Report Posted July 6, 2012 1 ohm i was also looking at crescendo 5500
Recommended Posts
Archived
This topic is now archived and is closed to further replies.