box design for 03 tahoe

[Arod45]

Have 2 DD 2500 series 15s with a crescendo 2000 watt amp. Only thing i need left is a box design for my 03 tahoe. I need anywhere between 8 and 9 cubes of air. My max dimensions are 47" wide, 20" high, and however far deep. Any design would be appreciated. Already drawn on a program and with dimensions would be great

Edited July 29, 2012 by Arod45

[Joe X]

Here is a suggestion:

Enclosure Specifications:

Fb = 36 Hz

Vb = 9.5 ft^3

External Height = 20 in

External Width = 47 in

External Depth = 26 in

Port Width = 32 in

Port Height = 4 in

Cut Sheet List:

* All Dimensions in Inches.

* Wood Thickness is 3/4 for all Parts.

External Enclosure Parts:

2 x Top & Bottom (3 parts) = 47 x 26

Left & Right Sides = 24 1/2 x 17 3/4

Front & Back = 47 x 17 3/4

L Port Internal Assembly Parts:

Front to Back = 15 3/4 x 33 1/2

Port Left Side Assembly:

15 3/4 x 4

Port Right Side Assembly:

15 3/4 x 4

Assembly guide (generic dimensions):

Any changes, comments or questions let me know.

[tonytone4143]

nice design there..

[tonytone4143]

what is that tuned to?

[Arod45]

Could you take the top off so I can see what it looks like inside

[Joe X]

Could you take the top off so I can see what it looks like inside

Some bracing.. that's all:

Edited July 29, 2012 by Joe X

[Arod45]

I'm a little confused by the port. Like how and where the air will actually flow

[Ian Macfadgen]

the hole doesnt go through the whole box, lol... its just like any other port, it ends before the end of the box.

[Joe X]

I'm a little confused by the port. Like how and where the air will actually flow

Added a pic from another angle to see if that helps.

[Arod45]

alright i think i have the general idea