Please help

[BassMunky]

I have a Sundown 100.4 amp channel 1/2 hooked up to tweeted 3/4 to mids active these are the 6.5 germaniums. Headunit is jvc-840. My problem is the 1 channel keeps on cutting in and out only for the left tweeter. Any help thankyou

[Guest]

loose rcas?

loose speaker wire connections?

[BassMunky]

it not that i hooked the tweeter up to the first channel and it doesnt even work now. the wire the tweeter soldered to from factory. Also hooked it up the the channel 2 how i orignal had it and it wotks fine.

Edited August 1, 2012 by BassMunky

[Guest]

did you try new rca cables

[Ddub847]

maybe the tweeter blew

[will77530]

have you tried a different speaker on that channel of the amp

[Guest]

it not that i hooked the tweeter up to the first channel and it doesnt even work now. the wire the tweeter soldered to from factory. Also hooked it up the the channel 2 how i orignal had it and it wotks fine.

i really dont understand what that means. you said the tweeter that was originally on channel 1, which is the presumed affected channel, was wired to channel 2.

which one is it

[BassMunky]

yes the whole setup of wire and tweeter that was on channel 1 works perfectly fine on channel 2. How could the channel blown if that the case?

[BassMunky]

if the the wire touched and shorted could that have caused the problem or the channel not to work or cut in and out?

[White Lightning]

did you tune below the tweeter's recommendations ... common problem with active setups ...