Crandis16 Posted August 1, 2012 Report Share Posted August 1, 2012 same thing happened on my buddy's amp. we took the cover off and actually removed the RCA connect. took it out somehow (he did it) and put it back in. resoldered connections did that work out good? He got it out. It make it easier to work with for sure. I'll ask him how he got it out though. My only dealing in it was taking out the RCA female Quote My Red zx2 Build Log My Black zx2 Build Log My Red zx2 UBL Link to comment Share on other sites More sharing options...
Crandis16 Posted August 1, 2012 Report Share Posted August 1, 2012 same thing happened on my buddy's amp. we took the cover off and actually removed the RCA connect. took it out somehow (he did it) and put it back in. resoldered connections did that work out good? here's what he did... so the core of the RCA stuck in there is plastic. heat up a pin and shove it in there at an angle so that it melts the plastic core then let cool. then pull it out.you will have to resolder the RCA female unless you don't remove it from the amp Quote My Red zx2 Build Log My Black zx2 Build Log My Red zx2 UBL Link to comment Share on other sites More sharing options...
satish1015 Posted August 1, 2012 Report Share Posted August 1, 2012 i would say to use the same rca wire that it broke out of then put some silicon or some kinda glue on the inside where the pin goes on the wire then push it back into the rca input.. but be careful not to get any glue on the terminal.. then let it dry and pull that bitch back out! when this happened to me i used some pliers.. nd then it happened again and i used the wire and got it out.. then switched to new wires Quote 2008 BMW 550i M Sport Build coming soon! 2000 Volvo s40 1.9TPioneer DVD navigation head unitO2 audio performance mid range speakers2 Crescendo PWX-6 Pro Mid Range Speakers2 Crescendo PWX-8 Pro Mid Range Speakers4 Selenium ST200 Super TweetersHifonics ZRX2000.4 Amplifier2- 12 inch DC Audio Level 4 m2Hifonics Brutus BXI-1610D Amplifier2 KinetiK HC1400R- Secondary BatteriesKinetik HC600- Secondary BatteryKnukonceptz 1/0 gauge big 3 upgrade Link to comment Share on other sites More sharing options...
Kingcuong5o4 Posted August 1, 2012 Report Share Posted August 1, 2012 i did it once with super glue and safey pin Quote Link to comment Share on other sites More sharing options...
J R Posted August 1, 2012 Author Report Share Posted August 1, 2012 I tried some glue but I'm scared to use too much. I tried a tiny tiny tiny screw and so far this thing is tighter than a virgin and not wanting to come out. Quote ***2001 GMC 2500HD Regular Cab*** -Jensen 9312 Flip-Out -2 12 inch Pioneer Step-up Shallow Mounts -Kicker ZX750.1 for Lows -Pioneer 6.5 coax in the doors -Pioneer 4x6 coax in the pillars -Old School Alpine MRV-F250 for Mids/Highs ***1969 Camaro Z/28*** -500+ cubic inch 950hp BBC + 400-650 shot of Nitrous -Audio coming soon- Link to comment Share on other sites More sharing options...
aN-i-No Posted August 1, 2012 Report Share Posted August 1, 2012 I was gonna say a dab of JB weld and a screw. Let it cure and pull it out. Quote Link to comment Share on other sites More sharing options...
Crandis16 Posted August 1, 2012 Report Share Posted August 1, 2012 I would be afraid to use glue, you don't want to botch it too much Quote My Red zx2 Build Log My Black zx2 Build Log My Red zx2 UBL Link to comment Share on other sites More sharing options...
J R Posted August 1, 2012 Author Report Share Posted August 1, 2012 Good news!!! For this particular amp, there is holes in the top (Fosgate 25 to life power 1000), and I was able to..................... Before Hmmmm a hole......... Maybe just pry on this here a little........ HELL YEAH!! After Quote ***2001 GMC 2500HD Regular Cab*** -Jensen 9312 Flip-Out -2 12 inch Pioneer Step-up Shallow Mounts -Kicker ZX750.1 for Lows -Pioneer 6.5 coax in the doors -Pioneer 4x6 coax in the pillars -Old School Alpine MRV-F250 for Mids/Highs ***1969 Camaro Z/28*** -500+ cubic inch 950hp BBC + 400-650 shot of Nitrous -Audio coming soon- Link to comment Share on other sites More sharing options...
Crandis16 Posted August 1, 2012 Report Share Posted August 1, 2012 nice!!! that looked very easy Quote My Red zx2 Build Log My Black zx2 Build Log My Red zx2 UBL Link to comment Share on other sites More sharing options...
J R Posted August 1, 2012 Author Report Share Posted August 1, 2012 Not too bad at all, it wasnt sealed off from the back so it made for a quick pry with a bent up key-ring LOL. Quote ***2001 GMC 2500HD Regular Cab*** -Jensen 9312 Flip-Out -2 12 inch Pioneer Step-up Shallow Mounts -Kicker ZX750.1 for Lows -Pioneer 6.5 coax in the doors -Pioneer 4x6 coax in the pillars -Old School Alpine MRV-F250 for Mids/Highs ***1969 Camaro Z/28*** -500+ cubic inch 950hp BBC + 400-650 shot of Nitrous -Audio coming soon- Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.