Nicholas Mack Posted August 3, 2012 Author Report Share Posted August 3, 2012 (edited) look up i need 0.5 daily or 2 ohms i think im just going with the ap with the facebook code it be 463.41 for 4 this is my first real build ie not walmart special Edited August 3, 2012 by Nicholas Mack Quote Link to comment Share on other sites More sharing options...
satish1015 Posted August 4, 2012 Report Share Posted August 4, 2012 I have four of the APSM 1500 minis, two strapped per sub. They are doing rated and some. Running around .75 ohms per amp just fine. Clamped them at 72 volts 48 amps = 3456 watts each pair. So I would imagine if it was a 1 ohm load on each they would be damn close to the 3000 per pair. sorry OP.. don't mean to try and steal or poke my way into this thread.. but how do you have these wired? one amp to each coil? is it safe to do that? because those are REALLY cheap for that power! Quote 2008 BMW 550i M Sport Build coming soon! 2000 Volvo s40 1.9TPioneer DVD navigation head unitO2 audio performance mid range speakers2 Crescendo PWX-6 Pro Mid Range Speakers2 Crescendo PWX-8 Pro Mid Range Speakers4 Selenium ST200 Super TweetersHifonics ZRX2000.4 Amplifier2- 12 inch DC Audio Level 4 m2Hifonics Brutus BXI-1610D Amplifier2 KinetiK HC1400R- Secondary BatteriesKinetik HC600- Secondary BatteryKnukonceptz 1/0 gauge big 3 upgrade Link to comment Share on other sites More sharing options...
Scott Hughes Posted August 4, 2012 Report Share Posted August 4, 2012 (edited) I have four of the APSM 1500 minis, two strapped per sub. They are doing rated and some. Running around .75 ohms per amp just fine. Clamped them at 72 volts 48 amps = 3456 watts each pair. So I would imagine if it was a 1 ohm load on each they would be damn close to the 3000 per pair. sorry OP.. don't mean to try and steal or poke my way into this thread.. but how do you have these wired? one amp to each coil? is it safe to do that? because those are REALLY cheap for that power! They are strapped, two amps working together for each sub. One is the master and all settings on that amp are followed by the three slaves. I put my temp probe on them today after bumping for a while and they ranged from 103 to 104 degrees which is not bad at all for 1.50 ohm load between the two strapped, which equates to .75 per amp. Edited August 4, 2012 by Scott Hughes Quote Link to comment Share on other sites More sharing options...
satish1015 Posted August 4, 2012 Report Share Posted August 4, 2012 wow.. thats crazyyyy.. how long have you had these? Quote 2008 BMW 550i M Sport Build coming soon! 2000 Volvo s40 1.9TPioneer DVD navigation head unitO2 audio performance mid range speakers2 Crescendo PWX-6 Pro Mid Range Speakers2 Crescendo PWX-8 Pro Mid Range Speakers4 Selenium ST200 Super TweetersHifonics ZRX2000.4 Amplifier2- 12 inch DC Audio Level 4 m2Hifonics Brutus BXI-1610D Amplifier2 KinetiK HC1400R- Secondary BatteriesKinetik HC600- Secondary BatteryKnukonceptz 1/0 gauge big 3 upgrade Link to comment Share on other sites More sharing options...
Nicholas Mack Posted August 4, 2012 Author Report Share Posted August 4, 2012 (edited) ok so could only order one this morning dont know how fund are gonna be but i think i may wait to order more next check i have less bills but side not it will be here tomorrow on the free ship hellz ya. and if u run yours like that i can drop mine down to 0.7 ohm (should be 0.5 be thats what the meter reads) and just put the crappy kenwood up till i get more btw you cant strap 3 amps right?? and ok these capcell things does that raise you to 16v if so is it safe and would it help or just more kinetik Edited August 4, 2012 by Nicholas Mack Quote Link to comment Share on other sites More sharing options...
Scott Hughes Posted August 4, 2012 Report Share Posted August 4, 2012 ok so could only order one this morning dont know how fund are gonna be but i think i may wait to order more next check i have less bills but side not it will be here tomorrow on the free ship hellz ya. and if u run yours like that i can drop mine down to 0.7 ohm (should be 0.5 be thats what the meter reads) and just put the crappy kenwood up till i get more btw you cant strap 3 amps right?? and ok these capcell things does that raise you to 16v if so is it safe and would it help or just more kinetik Mine are wired at .5 ohm but it comes out to around .75 after box rise, I have seen it as high as .88. They are good up to 16v. Quote Link to comment Share on other sites More sharing options...
Nicholas Mack Posted August 4, 2012 Author Report Share Posted August 4, 2012 (edited) thanks got it today and and i love it just hooked up @ 2 ohm for now i may wait to get more it's only 2 weeks who wants to do all that rewiring in this Oklahoma heat it's bad lol do you do comps with that cuz thats gotta hit mines @ 3/4 power and it hit's lol and u have 4 @ like 110% power lol cant wait to get one more do u ever pop the fuze cause i did allready got my wire preety warm Edited August 5, 2012 by Nicholas Mack Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.