MusicJunkie Posted January 17, 2008 Report Posted January 17, 2008 Hey, Ok i just installed a 4.100 PDX alpine amplifier which has two 30 fuses in the back, My alternator is rated at 130 amperes, I am looking to add another 1000 Watt amp for an Fi Sub, am i going to need a new alternator or any type of new battery. thanks alot for any help 1996 Mercury Sable Stationwagon - Infinity Kappa 682.7 cf's front and back - Alpine Pdx-4.100 - Hifonics Txi 1008D - Fi 12" Q, ported at 33Hz - Kicker distribution hardware - (1) Kicker 4 gauge run Plans.... - Sound Processor (Rockford 3sixty.2 or MTX) - Dynamat - another Fi Q 12 - H/O alternator - Aftermarket Headunit - Component set for upfront
audioman21 Posted January 17, 2008 Report Posted January 17, 2008 do a run of 1/0 gauge for your amps and the big 3 and you should be fine.
dmanson Posted January 17, 2008 Report Posted January 17, 2008 yeh you'll be fine pushing that much power on that 130 amp alt 2-DC 15XLM2 D.7s 1-DC 5K amp (1) XS Power D6500(UNDERHOOD) and (1) XS3000(REAR) 3 runs 1/0ga for power and 2 runs of 1/0ga for negative. (2)-RFT165s components, ...... 4 separate 1 inch tweetersRF T600-2(fronts) Punch 450.4(rear) Audiocontrol 3.1. DC power 260amp alternator w/MLA Module
Recommended Posts
Archived
This topic is now archived and is closed to further replies.