Jump to content

Recommended Posts

Posted

My stepdaughter has a 65 mustang wich I have been driving for about 6 months, until she got het DLs last week, she drove it for about 3 days, then dead

The carb was rebuilt about 3 days before it died

The day the car died, in the morning, it DID have a very ruff low RPM idle (3 days after carb rebuild)

That night she drove to the "PACK" concert in Citrus Heights, came home about 12am

the next morning, I had to drive the car to work, went to start it, dead....

The battery eventually died trying to start it... so I assume it was a bad battery

later that night I tried jumping it, it seemed better, starter freely starting, but no combustion, I tried a newer SUV with a big alt, nada

Got a new starter, upgraded all batt cables to 4gauge, grounded everything alot better, cleaned all connections, and new batter

Nada

starter fluid, nada

This is a 65 mustang with a 200ci inline 6, that kicked ass before the carb rebuild ( gas IS flowing good)

Has vacuum advance, Iam guessing a possible ignition issue

If it was the head gasket, wich I will find out this weekend, how would it sound, or feel?

There is common oil leakage on the engine, valve covers , oil pan, its a 40yr old engine

I did rebuild the head personally about 3 months ago, ran strong, and like a champ until now

I will do a compression test this weekend, and spark test, the spark wires are oldddd, but held up great...

Iam trying to completely restore everything in the engine bay, next is to replace all wires directly from the harness, and loom and hook all wires, and paint the bay with rhino liner, and engine red, with more chrome

The problem with upgrading to a V8 is all the effort and money in THIS engine- This is a 18yr old, who goes to school full time, and works at Orange Julius part time

Iam not on here ranting, these are not like 50 questions Iam hoping to get answered, Iam explaining what I have done so far, before this weekend, and looking for some insight

the engine is ofcourse very basic, hell I rebuilt the head, alot of the suspension, and did alot of body work, and primed the car myself so far, Ive rebuilt engines in the past, in my teen days, but this is frusterating, because there are a few things Iam not all there on, like the distributer, and timming, and some of the wiring around the distributer

Iam trying to upload pics, but now the comp doesnt want to read the SD card WTF

anyways, if anyone has any ideas on other areas to look after reading this, Iam very open to ideas

sundown.jpg
I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members (See full list)

    • There are no registered users currently online
×
×
  • Create New...