Need Help With Box For 10" L7's

[NoFearX18]

Hey guys,

Right now i have a nice fiberglass sealed encloser for my 10" L7's. i really like it but i want a good ported one. if anyone has and ideas on how i should build it to get the most out of them please help. i have a Plymouth laser. its basically a Mitsubishi Eclipse. 2 door hatchback. i dont have much room but i want to get my subs to really pound. I have a Hifonics BXI1606d mono amp.

my max dimensions for my trunk are:

W- 30"

L"- 24"

H"- 11"

i listen to rap/hip hop music. i like alot of bass. if that helps

If anyone has any ideas or some designs that worked good for you please give me a hand here. this is my first system.

Thanks in advance.

[NoFearX18]

Anyone?

[+ZER0Hz+]

try posting in the "need enclosure plans" thread

peace

[NoFearX18]

try posting in the "need enclosure plans" thread

peace

i already did. i ddint see it until after i posted this tho. thanks.

if anyone has any idea please let me know. thanks.

[EricM9104]

Hey, nice to see you signed up. (Eric9104 from YouTube)

So you're unable to do a box slightly bigger than what you can do now?

Currently what I've got for a box calculated (without a port currently) and going to the max dimensions you specified, each sub would see about 1.61 cubes each (without port displacement)

Would 1.47 cubes per sub be enough ported?

If so, the box can be as big as what you specified and have 2 2" round ports (each 19.5" long) and that'd give you a tuning of 32.03Hz.

[NoFearX18]

Hey, nice to see you signed up. (Eric9104 from YouTube)

So you're unable to do a box slightly bigger than what you can do now?

Currently what I've got for a box calculated (without a port currently) and going to the max dimensions you specified, each sub would see about 1.61 cubes each (without port displacement)

Would 1.47 cubes per sub be enough ported?

If so, the box can be as big as what you specified and have 2 2" round ports (each 19.5" long) and that'd give you a tuning of 32.03Hz.

Hey, yea thought I'd just see what its like. need some help anyway lol

i was thinking keeping them ported but in on chamber instead of both being in their own. i talked to another person on youtube about it too and he said i could do it like that and id have roughly 3.2 cubes and for ports i could do 2 3" round ports and have them anywhere from 8-13 inches long each. he said depending on what i pick ill be in the 28-35hz range.

does this sound good?

if so im not sure what length port i want...

[EricM9104]

Gimme a few a minutes and I'll throw together a box design in CAD. Ports and subs up?

[NoFearX18]

Gimme a few a minutes and I'll throw together a box design in CAD. Ports and subs up?

ok cool thanks, and yes port and subs up.

haha your avatar cracks me up at first i looked at it and thought o a guy chasing pidgins and i typed for a lil and look back and saw the big ass one. lmfao thats funny man

Edited January 20, 2008 by NoFearX18

[EricM9104]

Box:

Dimensions:

30" wide (divider is right in the middle.

11" tall

24" long

Port is 8.6" long tuned to 32Hz

each chamber is around 1.7 cubes.

Edited January 20, 2008 by emat19876

[NoFearX18]

Box:

Dimensions:

30" wide (divider is right in the middle.

11" tall

24" long

Port is 8.6" long tuned to 32Hz

each chamber is around 1.7 cubes.

ok cool ill try to make one like that. it looks good. how did you do it? what software did you use?