Jump to content

2004 dodge dakota z v3 15 build


Recommended Posts

Will be posting more pics soon guys! got a slightly important update, my 4th order design has been paid for i went with RAM designs. I will be building it after christmas

04 dodge dakota ext cab 4x4

excessive amperage 300 amp alt with MONSTER stud =)sundown z v3 15 in a 4th order on aq2200sundown 100.4 2 way active...2 Prv audio 6mb200 & 2 re XXX tweetersdeka intimidatorkenwood x396big 3 1/0 knu wire back to deka intimidator

Link to comment
Share on other sites

good looking truck man, as far as the tires go if you want a good balance between a mud terrain and not quite an all terrain look at the nitto trail grapplers.

My Build Thread 2005 F150 : 2005 F150 Center Console Build

Center Console - 3.2 cubes @ 35hz

4 RE Audio SRX10s - Pure Audio 3000.1

8 6.5 Soundstream SME.658 - Soundstream TN4.900D

4 NX-5 Super Tweeters

Link to comment
Share on other sites

good looking truck man, as far as the tires go if you want a good balance between a mud terrain and not quite an all terrain look at the nitto trail grapplers.

not bad tires but when your on the highway they make a sound that your hub bearing does when its going out

08 Ford F150

Link to comment
Share on other sites

good looking truck man, as far as the tires go if you want a good balance between a mud terrain and not quite an all terrain look at the nitto trail grapplers.

not bad tires but when your on the highway they make a sound that your hub bearing does when its going out

I ran super swampers before I dont even hear these haha

My Build Thread 2005 F150 : 2005 F150 Center Console Build

Center Console - 3.2 cubes @ 35hz

4 RE Audio SRX10s - Pure Audio 3000.1

8 6.5 Soundstream SME.658 - Soundstream TN4.900D

4 NX-5 Super Tweeters

Link to comment
Share on other sites

Time for the rebuild! I gots updates! :dance:

hdtrip_zps6f9f5c54.jpg

Went to home depot to get all my supplies this was the day after that huge snow storm last week we got about 2 feet of snow. 4x4 drifting is soooo much fun!

cuts_zpsf6ed87a4.jpg

Got all my cuts done. I ended up having to make all my small cuts with a circular saw and a t sqaure, thankfully i had my buddy there to hold the square. For the long cuts we had to drive out to his dads job site where the table saw was( wasnt in the shop ) 45 min drive later and i have all my cuts done!

dryfit_zps63ca3988.jpg

That was the dry fit before all the cuts were done i only had to cut a half inch off the big pieces so thats about how big its guna be

ramdecal_zps06a2913a.jpg

ramdraft_zpsa69d6a5d.png

Here are the specs: 2.1ft^3 sealed and 4.75ft^3 ported tuned to 45hz

04 dodge dakota ext cab 4x4

excessive amperage 300 amp alt with MONSTER stud =)sundown z v3 15 in a 4th order on aq2200sundown 100.4 2 way active...2 Prv audio 6mb200 & 2 re XXX tweetersdeka intimidatorkenwood x396big 3 1/0 knu wire back to deka intimidator

Link to comment
Share on other sites

Looks good so far, for tires, id say the good year mtr with kevlar they are some mean ones that are good on the street. Super swampers suck for the street conditions, i ran them on my jeep for 6 years and they went bald finally, right now im running all terrains. which suck off road they pack up quick, they are good in the snow but suck in the ice.

Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell

Kenwood H/U

1/0 wire,

136 amp alt 200 ah batteries 12.7 daily

2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts

Mb quart 125.4 wired to 4 aura 6's

3.6 cube box tuned to 36 plays down to 23hz

Link to comment
Share on other sites

cant afford those goodyears, they are really nice tho. Ive been eying the falken wildpeak at 33x12.5 r15. Ordering up some cragar soft 8s. I wont be able to finish the box until my wire comes in. I ordered 10ft of black and 10ft or red ofc 8ga from audiotechnix should be in friday. My plan is to get as much work done as possible by then so i cant mount the sub and hopefully have it playing saturday night or sunday

04 dodge dakota ext cab 4x4

excessive amperage 300 amp alt with MONSTER stud =)sundown z v3 15 in a 4th order on aq2200sundown 100.4 2 way active...2 Prv audio 6mb200 & 2 re XXX tweetersdeka intimidatorkenwood x396big 3 1/0 knu wire back to deka intimidator

Link to comment
Share on other sites

cant afford those goodyears, they are really nice tho. Ive been eying the falken wildpeak at 33x12.5 r15. Ordering up some cragar soft 8s. I wont be able to finish the box until my wire comes in. I ordered 10ft of black and 10ft or red ofc 8ga from audiotechnix should be in friday. My plan is to get as much work done as possible by then so i cant mount the sub and hopefully have it playing saturday night or sunday

Those Falken are really good tires, last a long time. I've never heard anybody complain about them! Look forward to seeing more progress.

My Build Thread 2005 F150 : 2005 F150 Center Console Build

Center Console - 3.2 cubes @ 35hz

4 RE Audio SRX10s - Pure Audio 3000.1

8 6.5 Soundstream SME.658 - Soundstream TN4.900D

4 NX-5 Super Tweeters

Link to comment
Share on other sites

cant afford those goodyears, they are really nice tho. Ive been eying the falken wildpeak at 33x12.5 r15. Ordering up some cragar soft 8s. I wont be able to finish the box until my wire comes in. I ordered 10ft of black and 10ft or red ofc 8ga from audiotechnix should be in friday. My plan is to get as much work done as possible by then so i cant mount the sub and hopefully have it playing saturday night or sunday

Those Falken are really good tires, last a long time. I've never heard anybody complain about them! Look forward to seeing more progress.

they arent too expensive either 740$ shipped for the 33s that like 170 each. The 35s are like 230 or something like that

04 dodge dakota ext cab 4x4

excessive amperage 300 amp alt with MONSTER stud =)sundown z v3 15 in a 4th order on aq2200sundown 100.4 2 way active...2 Prv audio 6mb200 & 2 re XXX tweetersdeka intimidatorkenwood x396big 3 1/0 knu wire back to deka intimidator

Link to comment
Share on other sites

Got some more work done today, also went to home depot again to get some t nuts bolts and washers only spent 7$ Woot! Also found out i left the inner support pieces on the sealed side at the job site. Luckily i have enough scrap to cut the two 16x14 pieces. The brace and sub baffle are not mounted just the sides, i also put the 45 in the port into place. Im using a combo of tite bond 2 and gorrilla wood glue. Now onto the pics!

washer_zps159180ca.jpg

port_zpsef474d42.jpg

glue_zpsc52ad01a.jpg

baffle_zpsdc2822f1.jpg

brace_zps57158b2b.jpg

almost_zps26622db4.jpg

Thats where i left it for the night, the baffle and brace arent in the right place i just set them there for picture sake. So glue is drying and batteries charging ill be back at it in the morning before i head to work

04 dodge dakota ext cab 4x4

excessive amperage 300 amp alt with MONSTER stud =)sundown z v3 15 in a 4th order on aq2200sundown 100.4 2 way active...2 Prv audio 6mb200 & 2 re XXX tweetersdeka intimidatorkenwood x396big 3 1/0 knu wire back to deka intimidator

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   2 Members, 0 Anonymous, 429 Guests (See full list)

×
×
  • Create New...