herbykw Posted February 11, 2013 Author Report Share Posted February 11, 2013 So got some stuff done today. My wife n I plasti-dipped my grill. I think it looks GREAT! I pulled my box out and threw some carpet on it. I have NEVER carpeted a enclosure before. It looks pretty good So I didint have enough carpet, it looks good from the front and back, but the sides and the bottom don't have much carpet. Lol. Luckily you can't really see the sides or bottom. 06 300C 5.7 Hemi K&N CAI JVC KW-AVX640 6.1" DVD DC Audio 3.5k 6 DC Audio 8"s 6 cubes 8" aero port at 32hrtz http://www.stevemeadedesigns.com/board/topic/183798-chrysler-300c-8-build/?p=2731834#entry2731834 Link to comment Share on other sites More sharing options...
SojiaRaggs9000 Posted February 11, 2013 Report Share Posted February 11, 2013 Looks good bro. Any plans to put the amp behind the box and seal the box off? I've tested box positions in my 300 quite a bit and sealing it seems to be the best. If you do... just make sure you lay down some painters tape that way the foam will stick to the tape and not the carpet. It will still make a very good seal. But if you EVER want to re-do or upgrade then I highly suggest you do this haha. Also the grille looks good. Reminds me of the 2010 mopar grille. Not sure if your like me but I wanted to see my whole grille. You can trim the sides that sit on top of the grilles lip and move it down so you can see the whole grille. Here is an example of what Im talking about. This was mine before I got the SRT front bumper. ALSO iirc tallest box you can go in our cars is like 14.5". If you want it firing foward that is. * Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )* Rockford Fosgate Balanced Line Driver * One FULLY LOADED ~ 10" DC m2 XL* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling* MechMan 240a High Output Alternator * KnuKonceptz Krystal Kable RCA Cables* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable* Five Exide Orbital ORB34M Marine 12 Volt Batteries* PowerMaster XS D3100 12 Volt Battery My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold Link to comment Share on other sites More sharing options...
sounddesires Posted February 12, 2013 Report Share Posted February 12, 2013 Lookin good man Link to comment Share on other sites More sharing options...
herbykw Posted May 17, 2013 Author Report Share Posted May 17, 2013 So today I decided to seal my box off from the trunk. I don't want to do anything to damage the car, so here is what I did. I made the templates with cardboard Cut them from 3/4" MDF, attached some rubber to the edges that would be against the trunk and painted. Mounted . Before After I did notice a little increase by ear, and it shook my center console more then before. Not a huge gain, but worth the scrap pieces of wood and the hour it took to complete .also waiting for a order from Sky High. 50' 1/0, fuse holders and ring terminals. can't wait 06 300C 5.7 Hemi K&N CAI JVC KW-AVX640 6.1" DVD DC Audio 3.5k 6 DC Audio 8"s 6 cubes 8" aero port at 32hrtz http://www.stevemeadedesigns.com/board/topic/183798-chrysler-300c-8-build/?p=2731834#entry2731834 Link to comment Share on other sites More sharing options...
ThreehundredC Posted May 17, 2013 Report Share Posted May 17, 2013 did you foam behind it or on top the box you want AIR tight seal but looks good anyways Link to comment Share on other sites More sharing options...
herbykw Posted May 18, 2013 Author Report Share Posted May 18, 2013 No I didn't. I have to pull it all out soon. Just got the wire and going to add two runs of 1/0 front to back. 06 300C 5.7 Hemi K&N CAI JVC KW-AVX640 6.1" DVD DC Audio 3.5k 6 DC Audio 8"s 6 cubes 8" aero port at 32hrtz http://www.stevemeadedesigns.com/board/topic/183798-chrysler-300c-8-build/?p=2731834#entry2731834 Link to comment Share on other sites More sharing options...
herbykw Posted May 18, 2013 Author Report Share Posted May 18, 2013 Next to my stinger 1/0 Some size comparisons 06 300C 5.7 Hemi K&N CAI JVC KW-AVX640 6.1" DVD DC Audio 3.5k 6 DC Audio 8"s 6 cubes 8" aero port at 32hrtz http://www.stevemeadedesigns.com/board/topic/183798-chrysler-300c-8-build/?p=2731834#entry2731834 Link to comment Share on other sites More sharing options...
SojiaRaggs9000 Posted May 19, 2013 Report Share Posted May 19, 2013 Looking good man. Before you lay down foam make sure you use the painters tape. It will save your carpet just in case you ever want to pull it out. While at the same time still making it air tight. * Eclipse CD3200 with PAC SWI-CAN2 and SW-ECL2 Steering Wheel Controls Interface* Pioneer D-Series Mids and Highs ( Fronts: TS-D1702C; Rears; TS-D1702R and Dash; TS-D1002R )* Rockford Fosgate PBR300X4 ( Mids and Highs Amp )* DC 3.5k with Dual Inputs; Custom Plexiglass Backing ( Sub Amp )* Rockford Fosgate Balanced Line Driver * One FULLY LOADED ~ 10" DC m2 XL* Custom Built Carpeted Ported Box Tuned to 32hz. Single Chamber With Volume of 1.44618³ ft ; 1.13216³ ft After Displacement* Custom Built Carpeted Trunk Wall with Added Fans for Amplifier Cooling* MechMan 240a High Output Alternator * KnuKonceptz Krystal Kable RCA Cables* Upgraded Electrical With 1/0 KnuKonceptz Kolossus Fleks Kable and 1/0 Sky High Car Audio Cable* Five Exide Orbital ORB34M Marine 12 Volt Batteries* PowerMaster XS D3100 12 Volt Battery My 2008 Chrysler 300 Limited - SuperCharged 3.5L V6 - UBL My Old 2005 Ford Taurus - CarDomain - Vehicle Was Sold Link to comment Share on other sites More sharing options...
COLTON94 Posted May 19, 2013 Report Share Posted May 19, 2013 Looks good, i have some dc 8s to lol their beasts for some 8s Link to comment Share on other sites More sharing options...
SupremeSipes Posted July 2, 2013 Report Share Posted July 2, 2013 Very cool build . Just got my 300 as well. Looking to do a build.. Probably 3 12s.. 2006 Chrysler 300 touring. 3 arc audio, arc series d4 12s hifonics brz 1200.1 for subs hifonics brz 600.4 for 6x9s ALL WAITTING FOR INSTALLION ! looking into coilovers or universal air ride 20 inch wheels, 5% tint on all windows 50% tint on windshield debaged rear trunk lid, wings and 300 logo demolded side stripping, black mesh grill, no ubl, not enough cool shit ! once the car is paid off and its mine... gen 2 viper swap, manual trans, going to get viper logos for the rear trunk and mold a viper diamond logo into the wings logo ! only 4 more years of payments and saving..... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.