TheNewbie Posted January 7, 2013 Report Share Posted January 7, 2013 Hey guys, I'm curious if anyone could help me get the vision in my head onto this picture... I want the SKAR logo across the back wall by the seats and have it lit up by LEDs.. White ones. I'd like it to be decent size, proportionate. It would have to be at the very end. Y the seats since I only have about 9 inches from the seats to the box of fake baffle.. I'm on the iPad so I appologise if I sound a little choppy.. If I need to explain better I will hop on a laptop anyways here are the two pictures I have to work with. Thank you advance for attempting! Edit: I would use plexiglass for the LEDs to shine through and have the plexiglass decaled so it was only the skar logo showing though.. If that makes a difference on the way it's shown. Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes. Link to comment Share on other sites More sharing options...
TheNewbie Posted January 8, 2013 Author Report Share Posted January 8, 2013 I made this really late and didn't even think bout how hard this would be to do, is it even possible to fabricate something like that on photoshop? Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes. Link to comment Share on other sites More sharing options...
elflako17 Posted January 8, 2013 Report Share Posted January 8, 2013 I know Steve did that same thing on his ISF he got a special paper printed out and put it on the plexiglass am not sure what it's but yes it's possible you should go check his UBL log 2010 Mazda 3 *Rebuild Time* Subs - (2) AA Mayhems 12's Sub amp - (1) Populus Audio TPA 6500 Headunit - Pioneer App Radio 2 Batteries - XS Power (1) D3100 up front | 6 XP950 rear Wire - Sky High 1/0 Gauge wires and RCA's and steve's VM1 Alternator - Singer 260 Externally Regulated Front Stage: (2) PRV Audio 10W650A (4) PRV Audio 8MR500-PhP-4 (4) DS Bullet Tweets | (2) 6.5 Components (Rear doors) Mids & high Amp : (2) Populus Audio 100.4 Processor: Rockford 3sixty.3 The Build Log : http://www.stevemeadedesigns.com/board/topic/175922-2010-mazda-3-2-aa-mayhems-12-pg14-new-video/page-11 Link to comment Share on other sites More sharing options...
TheNewbie Posted January 8, 2013 Author Report Share Posted January 8, 2013 I know Steve did that same thing on his LFA he got a special paper printed out and put it on the plexiglass am not sure what it's but yes it's possible you should go check his UBL log I ment in photoshop brotha Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes. Link to comment Share on other sites More sharing options...
Carbon Posted January 21, 2013 Report Share Posted January 21, 2013 hold on... Link to comment Share on other sites More sharing options...
Carbon Posted January 21, 2013 Report Share Posted January 21, 2013 JK ill work on a good one tomorrow Link to comment Share on other sites More sharing options...
TheNewbie Posted January 21, 2013 Author Report Share Posted January 21, 2013 JK ill work on a good one tomorrow Haha xD yeah man decided to do the same thing, just no LEDS just theSkar logo behind plexiglass Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.