01burban Posted March 8, 2013 Report Posted March 8, 2013 Hey there guys figure i should finally start my first build log So here is what I have Pioneer double din unit Avic f90bt Rockford rca's Rockford T1652-s x2 1/0 monster cable just cuz it was cheap with the magnetic flux in the middle Rockford distributer blocks A busted T600.4 with only 2 working channels P1000.1 Sundown Audio SA-8V.2 d2 Install bay 18 gauge for speaker got a roll for free from buddy rear view camera 4 gaude Lighting Audio now to your guyses favorive some pics some of the dissambly from previous build some dissasembly required Seats pulled out out with the old t500.1 HX2 Power 10'' wired at 1ohm forgot the picture of it in the box but i believe i was told it was 1 cube after displacement tuned at 35hz
01burban Posted March 8, 2013 Author Report Posted March 8, 2013 going to bed now will have more tomorrow
barney91 Posted March 8, 2013 Report Posted March 8, 2013 Whats wrong with the hx2 and how many sa8s are you getting Alpine 9884 RF T2 comp set up front The Epicenter 2x RF T10001bd 2x Sundown sa-15 t-line Big 3 Smd DD-1
01burban Posted March 8, 2013 Author Report Posted March 8, 2013 Whats wrong with the hx2 and how many sa8s are you gettingNothing really the spider does sag write a bit and it has this thing that can't take a lot of power it looks weird when it bumps what looks to be above the the magnet can't say the the problem would be still sounds pretty good at a certain power levelAnd running 2 8"s
barney91 Posted March 8, 2013 Report Posted March 8, 2013 I thought you were going to swap the 10 for just one sa8 but two is better lol well post the rest of the pics Alpine 9884 RF T2 comp set up front The Epicenter 2x RF T10001bd 2x Sundown sa-15 t-line Big 3 Smd DD-1
01burban Posted March 8, 2013 Author Report Posted March 8, 2013 O no haha... I will when i get home... Its kinda hard on a phone
agf144 Posted March 8, 2013 Report Posted March 8, 2013 Whats wrong with the hx2 and how many sa8s are you gettingNothing really the spider does sag write a bit and it has this thing that can't take a lot of power it looks weird when it bumps what looks to be above the the magnet can't say the the problem would be still sounds pretty good at a certain power levelAnd running 2 8"s i had the same thing happen to my fosgate he2 Chick took 3 shots of Jager, and then, pissed in my mouth.. oh.. wait.. naw.. that wasnt weird.. He probably tearin dat ass up every night. Reason for "insomnia" Ain't sleeping cause he's like a horny hamster on coke. 2000 grand prix gtp: SOLD My Home Theater Build (working progress) 2002 accord coupe subs: 2 soundqubed hds300 12s 4'1" towers tuned to 29hz sub: AQ hdc3 12 Amp: pioneer gm9061 amp: poineer gm9601 headunit: kenwood kdc 255u mids: SQ pro mids midbass: polk db 8s highs: stock mids/highs: shitty off brand
01burban Posted March 9, 2013 Author Report Posted March 9, 2013 Yeah i heard that's a little defect they have... I guess after a while since its a single spider gets tired and sags
01burban Posted March 9, 2013 Author Report Posted March 9, 2013 Ok so now for the the stuff going in here's a couple of what's going in The deck The T600.4 Some powa wire and ground Some zips I guess i missed the pic of the p1000.1 by itself
01burban Posted March 9, 2013 Author Report Posted March 9, 2013 Time to hook it all up Like in the first pics it was all stripped pulled the carpet up but left that foamy part So i ranned the rca's all through the middle even the speaker wires together All up and tucked and zip tied have to waste them somewhere haha A closer look at the rca Now on to the deck i soldered up the power cables and those 2 speakers but i don't remember why haha there aren't any speakers connected to them Some solder up ground Took some door panels off and and ran some new wire a lil scronny wire but hopefully get to swap it for something better Through the door clip thing Soldered up some female spades to hook up those components Heat shrunked
Recommended Posts
Archived
This topic is now archived and is closed to further replies.