KIRK_ADAMS Posted May 22, 2013 Report Posted May 22, 2013 Its a 2008 ZX10...stock bore/stock stroke ...heres a few pics this was when it was still a stock clutch, street bike..Had to change the upper fairing and put the headlight back in when I went out playing on the street ... This is how it looks now, It's going to be---stock stroke/stock bore with a LITTLE nitrous...and a slider clutch.... Wheelbase is now 80"
brandonsbeats Posted May 22, 2013 Report Posted May 22, 2013 80 inches on a stock displacement motor? you going bigger?
KIRK_ADAMS Posted May 22, 2013 Author Report Posted May 22, 2013 80 inches on a stock displacement motor? you going bigger? no, 998cc's...the bike doesnt weigh much, its very very very.....very light...with a little bit of nitrous..
brandonsbeats Posted May 22, 2013 Report Posted May 22, 2013 i dont know much about 10s is that stock rails or did you cut them?
KIRK_ADAMS Posted May 22, 2013 Author Report Posted May 22, 2013 stock rails, but I cut the subframe and brought it lower, then moved the seating position up...it has no tank on it anymore....Let me find a pick from last year
KIRK_ADAMS Posted May 22, 2013 Author Report Posted May 22, 2013 This is from last year..only had the bike out twice when it was " Purple Drank "...The new name of the bike is " Michael Meyers "..
lifted_silverado Posted May 22, 2013 Report Posted May 22, 2013 Nice bike, im suzuki fanboy though these zx10s get nasty though. Why so much arm for a stock motor? Better too much than not enough I suppose. What type of shot are you planning to spray on it? Gonna upgrade pistons, rods, valve springs for spray? Progressive shot or the good ole horn button pumper? Everythings in the attic or garage since the truck was sold last year. New build should be coming soon in a dodge cummins
KIRK_ADAMS Posted May 22, 2013 Author Report Posted May 22, 2013 Nice bike, im suzuki fanboy though these zx10s get nasty though. Why so much arm for a stock motor? Better too much than not enough I suppose. What type of shot are you planning to spray on it? Gonna upgrade pistons, rods, valve springs for spray? Progressive shot or the good ole horn button pumper? Yes, did everything...and its only going to be around 150++.....It will be progressive
Recommended Posts
Archived
This topic is now archived and is closed to further replies.