TylerParrish Posted July 10, 2013 Report Share Posted July 10, 2013 So I un-hooked the switch that I had connected to the remote wire on the 360.1, now the 360.1 stays off with just the remote wire plugged in (not connected to the switch). The light on the amp blinks between protect and on, with or without the RCA's in. Not sure if it's an amp problem, a 360 problem, or my problem. Any help with what causes the amp to go in and out of protect is appreciated. What the f**k is an appropriate signature supposed to look like?2013 Kia Forte Koup Pioneer AVH-X4600BT iDMax 12 DD M1c @ 2 ohms Rockford Prime 200.2 Pioneer 6.75" Comp Set XS S3400, D2700 Project DB Battery Terminals Axxess ASWC Stinger HPM Everywhereeee 90 Sq. Ft. of Stinger Roadkill Stock Alt Stuff To Come Sundown X-12 New Amp New Comps 4 Channel Amp My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/ My Old Build: http://www.stevemead..._+2000 +mustang Avatar Courtesy of SnowDrifter Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.