79 cutty Posted July 25, 2013 Report Share Posted July 25, 2013 Ok, I am looking for some suggestions. I have this craftsmen router table with the craftsmen router that came with it: It gets the job done, but is a huge PITA to change bits on because I have to lift the table to get the router out otherwise it hits the bench below it and you can't sneak a wrench in there to do it from under, so basically I am looking for some suggestions on a nice router table/lift. Or really options/suggestions on what people have found the most useful. Here is the one I have been looking at: It is going to run about $650 for that table, lift, the inserts for the center for larger bits, and casters. I like the idea of having casters to move around the garage because I don't have a "shop" other than the extra stall in my garage so being able to move it out of the way would be great. But really looking for some suggestions and experiences people have with these tables/lifts or if you know a better solution. Firm believer in letting my cars do my talking! You can't rush quality, it doesn't happen overnight. Quality takes time and dedication, but the end results more than pay for it. "Black Pearl" Build Thread http://www.stevemeadedesigns.com/board/topic/67183-1985-buick-regal-limited-build-log/page-1 Link to comment Share on other sites More sharing options...
79 cutty Posted July 26, 2013 Author Report Share Posted July 26, 2013 Nobody have experience with a router lift? Firm believer in letting my cars do my talking! You can't rush quality, it doesn't happen overnight. Quality takes time and dedication, but the end results more than pay for it. "Black Pearl" Build Thread http://www.stevemeadedesigns.com/board/topic/67183-1985-buick-regal-limited-build-log/page-1 Link to comment Share on other sites More sharing options...
79 cutty Posted July 27, 2013 Author Report Share Posted July 27, 2013 Anyone? Firm believer in letting my cars do my talking! You can't rush quality, it doesn't happen overnight. Quality takes time and dedication, but the end results more than pay for it. "Black Pearl" Build Thread http://www.stevemeadedesigns.com/board/topic/67183-1985-buick-regal-limited-build-log/page-1 Link to comment Share on other sites More sharing options...
79 cutty Posted July 29, 2013 Author Report Share Posted July 29, 2013 Really? No one has any experience with a good lift? Lol, I guess it is onto the internet reviews then! Firm believer in letting my cars do my talking! You can't rush quality, it doesn't happen overnight. Quality takes time and dedication, but the end results more than pay for it. "Black Pearl" Build Thread http://www.stevemeadedesigns.com/board/topic/67183-1985-buick-regal-limited-build-log/page-1 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.