Fuzzy336 Posted August 8, 2013 Report Posted August 8, 2013 So I'm about to be running 2 kicker zx2500.1 amps, and I want to control both of them off of 1 remote bass/gain knob up front, these amps do not have the master/slave option so I can't strap them, the wire to the knob appears to be a basic phone cord, could I just use a phone jack splitter to control both amps at the same time or would that not work? If not, how could I go about doing this? Any input would be apprecieated, thanks! My Youtube Channel Trying to guess the SPL of a system with out a meter is like trying to guess how much air pressure is in a compressor tank just by letting some of the air out. ...Seems like 90 psi...
Noel989 Posted August 8, 2013 Report Posted August 8, 2013 Get RCA y splitter, PAC lc1 and gain match the amps Build Log - http://www.stevemead...-cruiser-el-pt/
Fuzzy336 Posted August 8, 2013 Author Report Posted August 8, 2013 Is there any way to do it where i can still use the kicker knob though? Or is that the only way? My Youtube Channel Trying to guess the SPL of a system with out a meter is like trying to guess how much air pressure is in a compressor tank just by letting some of the air out. ...Seems like 90 psi...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.