Kyblack76 Posted August 15, 2013 Report Share Posted August 15, 2013 We did AD-1 it at a half ohm, it never got warm or went in to protect. I'd be confident running it safely at a half ohm with a decent charging system The run at .5, then wasnt in certified.. cuz it WOULD protect there.... SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Kyblack76 Posted August 15, 2013 Report Share Posted August 15, 2013 And,.. the certified 1ohm test .. WOULD be acting like its wired at .5. The test is a reactive test..... not nominal... SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
rfaudiomustang Posted August 15, 2013 Author Report Share Posted August 15, 2013 It took certified at .5 just fine. I'm not posting that in the video because Belva doesn't say they are stable there and I'm not trying to have some idiots on stock charging try and do that. Build In Progress! 2000 V6 Mustang H/U - JVC KW-ADV64BT 8 - P3D212's / 14cu. ft. / 34hz Front - T1675x2, PPS4-8x4, T1TSx4 Rear - T1675x2, T165x2 Sub Amps - T2500-1bdCPx2 Mids/Highs Amps - T600-4x2 3SIXTY.3 Signal Processor 51Ft. RF 1/0 Spool x 2 Excessive Amperage 300amp Alternator VMAX CT2500 x 2 Optima Yellowtop Link to comment Share on other sites More sharing options...
Kyblack76 Posted August 15, 2013 Report Share Posted August 15, 2013 It took certified at .5 just fine. I'm not posting that in the video because Belva doesn't say they are stable there and I'm not trying to have some idiots on stock charging try and do that. Man.. cool. I spoke with Tony, and a certifed .5 test, would protect 99% of the amps on the market.... SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
rfaudiomustang Posted August 15, 2013 Author Report Share Posted August 15, 2013 Build In Progress! 2000 V6 Mustang H/U - JVC KW-ADV64BT 8 - P3D212's / 14cu. ft. / 34hz Front - T1675x2, PPS4-8x4, T1TSx4 Rear - T1675x2, T165x2 Sub Amps - T2500-1bdCPx2 Mids/Highs Amps - T600-4x2 3SIXTY.3 Signal Processor 51Ft. RF 1/0 Spool x 2 Excessive Amperage 300amp Alternator VMAX CT2500 x 2 Optima Yellowtop Link to comment Share on other sites More sharing options...
Kyblack76 Posted August 15, 2013 Report Share Posted August 15, 2013 well, Looking at the specs. This amp has NO impedance protect... Man.. that seems scary. Guess it didnt protect... Because it didnt know better.......... ouch SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Kyblack76 Posted August 15, 2013 Report Share Posted August 15, 2013 Also.. it gave up the ghost. Why did it make LESS power at .5, than at 1ohm ????? Certified of course..... SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Kyblack76 Posted August 15, 2013 Report Share Posted August 15, 2013 SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Afficionado Posted August 15, 2013 Report Share Posted August 15, 2013 well, i'm excited for more ad-1 tests! If you have any questions relating to nutrition, lifting, or health in general, feel free to give me a PM and I will give you straight forward advice with no BS involved. Link to comment Share on other sites More sharing options...
purplesyrup Posted August 16, 2013 Report Share Posted August 16, 2013 Regardless, for a cheap amp that is only $300, 1700 certified amp dyno watts is legit for an amp that is so inexpensive, it probably has a decent warranty also. I mean, seriously, try to make a list of $300 amps that do 1,700 true unclipped watts at 12 volts You can see my list below, Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.