gzo12885 Posted October 13, 2013 Report Posted October 13, 2013 Oh ok, gotcha. Quote 2000 Chevrolet Tahoe Limited (Mine)HEAD UNIT: Pioneer AVH-X5500BHSBASS DRIVER: Sundown Audio [email protected] dailySUBWOOFER: (4) Sundown Audio Zv4 18d1BOX: under constructionMID/HI DRIVER(s): JBL PX300.4, Powerbass ASA600.4, Audiopipe 6002, American Bass SQ50FRONT DECK: Pioneer TS Pro 6.5, Power Acoustic nb-1, (4) American Bass SQ4.0 KICK PANEL: Kicker KS65 components REAR DECK: Powerbass XL Pro 6.5, Pioneer TS Pro 8's, Power Acoustic nb-2, Powerbass s412 4x10, (2) Crescendo pwx 10"ELECTRICAL: Big 3, all KNU & AP OFC 0awg on 240amp Mechman Alt, Audiopipe batt meter, (2) Scorpin batt metersBATTERIES: (3) XS Power 3400's, KInetic HC1800, Kinetic HC2000MISC: Fat Mat on all doors, Old setup: (4) SA15d4's on an NS1 151.0 on TL sealed 2010 Honda Civic LX (Wife's) 142.1 TL sealed trunkHEAD UNIT: Pioneer AVH-X7500BHS with Massive Audio EQ7BASS DRIVER: (2) Powerbass ASA1500.1d's(strapped) 3240w clamped @ 10.8v lol(stock alt)SUBWOOFERS: (1) Sundown Audio Zv4 12d2BOX: Custom built by me 3ft^3 @ 35hzMID/HI DRIVER: Powerbass ASA600.4FRONT DOORS: Alpine Sps610cREAR DOORS: Alpine Sps610cELECTRICAL: All Audiopipe 0awg, Big 3, Stinger batt meter, stock 90amp alt<p>BATTERIES: (2) Kinetic HC1400's, XS Power XP950
CleanSierra Posted October 13, 2013 Report Posted October 13, 2013 Strangeduck is right on this, PLUS I learned something today. Xmax is taken into effect as well as the other obvious things like motor width and depth and effective Sd 1 Quote Im not the one you want to try to troll. Just a fyi for you.
Daniel Harbeson Posted October 14, 2013 Report Posted October 14, 2013 (edited) I have an email from them, the .12 you are referring to is the displacement excursion. He never really told me what the actually displacement from the sub in volume would be. When my x-12 came in it didn't have any spec sheets in it or anything for warranty. Just a sub and a sticker . They wont even put the specs up on the website for them. Bryan Chamberlain To Daniel Harbeson Sep 6 This message contains blocked images. Show Images Change this setting Per sub… 3cuft after displacement with a port area of 42sqin tuned to the high 20's low 30's freq range. *Thank You* Bryan Chamberlain Sundown Audio Public Liason/Tech support Bryan Chamberlain To Me Sep 9 Box size changes with tuning. Use a box calc online to get specifics. That subs displacement is 0.12cuft excursion, you're looking at around 3-4in *Thank You* Bryan Chamberlain Sundown Audio Public Liason/Tech support Edited October 14, 2013 by Daniel Harbeson Quote
jimmydamoose Posted October 15, 2013 Author Report Posted October 15, 2013 (edited) Same with mine Daniel....no email yet, i'll call tomorrow EDIT***** So I'm now being told by someone with a pair of x-12's that they are to be calculated using the zv4 box specs..... Edited October 15, 2013 by jimmydamoose Quote
Daniel Harbeson Posted October 17, 2013 Report Posted October 17, 2013 Same with mine Daniel....no email yet, i'll call tomorrow EDIT***** So I'm now being told by someone with a pair of x-12's that they are to be calculated using the zv4 box specs..... isnt the zv4 motor bigger than the x12? Quote
jimmydamoose Posted October 17, 2013 Author Report Posted October 17, 2013 .............. ............ * From Left to Right : TEAM Sundown, NS v.3, NS v.2, Z v.4, NS v.1, Z v.3, Z v.2, and finally the X Motor Quote
jimmydamoose Posted October 17, 2013 Author Report Posted October 17, 2013 Just got off the phone maybe 15minutes ago with Brian from Sundown. Here are his words & #'s verbatim: f: 30Hz Port Area (14sqin per ft^3 of enclosure volume: 42in^2 Displacement : 0.12 Enclosure Volume : 3 ft^3 So I'm going to be going with the second specs altered a little to get that port area up to 42. I'll report back when its being cut/installed and how it performs. Quote
Daniel Harbeson Posted October 23, 2013 Report Posted October 23, 2013 look what i got today from Bryan lol Bryan Chamberlain To Me Today at 7:33 AM This message contains blocked images. Show Images Change this setting Sealed 1.5cuft NET Ported 3cuft NET Displacement 0.12cuft Depth 9.75" Outside Diameter 12.75" Cut-Out 11.1" Quote
jimmydamoose Posted November 9, 2013 Author Report Posted November 9, 2013 (edited) Here is a teaser of the results of the proper box & fitment. This is boxV1, V2 will be recut using CNC routing table over winter break, cleaning up aesthetics & then that one will be wrapped in some leather of some sort to match the other interior bits. http://www.flickr.com/photos/jamesgh/10765494954/ Edited November 9, 2013 by jimmydamoose Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.