meade916 Posted October 28, 2013 Report Share Posted October 28, 2013 the light will flicker sometimes when turning the gain up. Ignore that and wait for it to become solid. As for the 4 channel, try the negative terminal. Sometimes that is the problem on 4 channels. The distortion light would never come on fully to show distortion, just randomly flash when turning the gain and never at the same point. I could turn the gain all the way up with out the light fully coming on to show distortion no worries, contact Tony, they will fix it for you. We have no idea what the person before you did to it but really it is more then likely nothing that can't be taken care of pretty easily. Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
K_SubieXT Posted October 29, 2013 Author Report Share Posted October 29, 2013 Okay I think the leads have a short in them. I just tested it on a 4 channel I have on my little test bench, when the base of the red probe is bent I don't get any signal but when it's straight I get a pretty strong signal . The distortion light is still a little weird but that might be the battery Quote My 95 Jeep Cherokee Build: http://www.stevemeadedesigns.com/board/topic/157643-1995-jeep-cherokee-build-sub-is-in-and-playing/ Link to comment Share on other sites More sharing options...
K_SubieXT Posted October 29, 2013 Author Report Share Posted October 29, 2013 the light will flicker sometimes when turning the gain up. Ignore that and wait for it to become solid. As for the 4 channel, try the negative terminal. Sometimes that is the problem on 4 channels.The distortion light would never come on fully to show distortion, just randomly flash when turning the gain and never at the same point. I could turn the gain all the way up with out the light fully coming on to show distortion same thing happened to me but might just not be enough voltage going to the amp. Also, as Steve said the light will come on and off while turning up the gain and NOT at the same point as YOU stated. Says that right in the manual. maybe i missed it but what equipment are you using? Line driver needed perhaps? You got the manual for the DD-1 correct? Crescendo 2k and Rockford prime 4 channel. Kenwood HU Quote My 95 Jeep Cherokee Build: http://www.stevemeadedesigns.com/board/topic/157643-1995-jeep-cherokee-build-sub-is-in-and-playing/ Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.