toolmaker Posted October 24, 2008 Report Share Posted October 24, 2008 Well, hopefully I will start building this in a week or so, tuned to 30hz, 140 sq.in. of port( measured from surrounds) 108in. long. For the 2 twelves mentioned earlier. Give me you thoughts, keeping in mind I need to add some bracing for the line walls. Also the top is doubled up 3/4". 94' Suburban Kenwood HU RF T3002 2x SAZ-1500D's 2x PG Rsd 6.5's 4x RE SE 12' Kicker Hyperflex 1/0 ...more still to come Link to comment Share on other sites More sharing options...
Airborne Posted October 24, 2008 Report Share Posted October 24, 2008 we could make something up...maybe isobarik loading so the compression chamber can be even smaller to save some room...more motor force...a little higher power handling...it should be good.cool man, I can't wait. Link to comment Share on other sites More sharing options...
Airborne Posted October 27, 2008 Report Share Posted October 27, 2008 we could make something up...maybe isobarik loading so the compression chamber can be even smaller to save some room...more motor force...a little higher power handling...it should be good.any luck with the specs? Link to comment Share on other sites More sharing options...
Airborne Posted October 27, 2008 Report Share Posted October 27, 2008 we could make something up...maybe isobarik loading so the compression chamber can be even smaller to save some room...more motor force...a little higher power handling...it should be good.any luck with the specs? Link to comment Share on other sites More sharing options...
aznboi3644 Posted October 28, 2008 Report Share Posted October 28, 2008 working on it Link to comment Share on other sites More sharing options...
Airborne Posted October 28, 2008 Report Share Posted October 28, 2008 working on itCool, my wife is going to hate me. I am going to be doing three builds at the same time. Two are for the same car. Link to comment Share on other sites More sharing options...
chief_bignut Posted December 10, 2008 Report Share Posted December 10, 2008 http://i138.photobucket.com/albums/q248/fo.../tlinetutor.jpg using the image here are the measurments from entrance to intersection to intersection to intersection to intersection to wall or all the way through?? from wall to wall and so on??? Link to comment Share on other sites More sharing options...
Forevrbumpn Posted December 10, 2008 Author Report Share Posted December 10, 2008 measure intersections, exit, and behind woofer for quick reference you can just measure the lines as a whole, you will be off about 2hz, thats not going to hurt to much though... I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy. Link to comment Share on other sites More sharing options...
Forevrbumpn Posted December 11, 2008 Author Report Share Posted December 11, 2008 Got a hold of some 15s temporarily so I get to use atleast 1 until recone parts come in, so I dusted off, and fumigated for spiders ( 40hz test tones ) And cleaned up my ole Iso loaded bandpass Tline, loaded a sub up in it, and ohh so sweet. This box transforms, so its either a iso bandpass, transmission line, ported, or standard bandpass t-line Felt good to have some beat playing this low with authority again!! ^^ Ugly white door, I had tossed the old regular MDF door, this will have to do I built these subs about 3 years ago, I ended up selling them to a friend about a year ago, he loved them so much, he used them as trophy pieces, waiting to find a better sub. He went thru L7s, Type Rs, and a few other subs to name a few, and always went back to these. Couldn't blow them, and couldn't find any subs that sounded better SO, I'am just reconing these from DVC 4ohm to DVC 1ohm, and adding a 3rd spider, and longer coil winding width Just thought I'd share I have a ritual called "terminator". I crouch in the shower in the "naked terminator" pose. With eyes closed I crouch for a minute and visualize either Arnie or the guy from the 2nd movie. I then start to hum the T2 theme. Slowly I rise to a standing position and open my eyes. It helps me get through my day. The only problem is if the shower curtain sticks to my terminator leg. It sorta ruins the fantasy. Link to comment Share on other sites More sharing options...
JMC0415 Posted December 11, 2008 Report Share Posted December 11, 2008 Subs look manly. Lol Damn I wish I had some beat right now. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.