COLTON94 Posted March 26, 2014 Report Posted March 26, 2014 I had a set of 6.5s in the doors and a set of sound quebed super tweets mounted in the dash reflecting off the windshield. That lil combo is still one of the most balanced front stages iv ever herd.
Abraham DjGb Ortiz Posted March 26, 2014 Author Report Posted March 26, 2014 I also did the same with the pioneer supertweets @COLTON94! It was a stout little setup, but the upgrade sure was worth it
Abraham DjGb Ortiz Posted March 26, 2014 Author Report Posted March 26, 2014 Here we mocked up the general placement of everything on the door panel. The rectangular cutout is an etched acrylic panel, which you will see later in the thread. Photobucket is really difficult and frustrating on an android, so this may take a while
Abraham DjGb Ortiz Posted March 26, 2014 Author Report Posted March 26, 2014 Used some dowell rods to angle everything the way we wanted to and cut the doors a bit to clear the beefy magnets. This is the curvature we came up with
Abraham DjGb Ortiz Posted March 26, 2014 Author Report Posted March 26, 2014 Laying down the fabric for the resin
Recommended Posts
Archived
This topic is now archived and is closed to further replies.