BigPimpin91 Posted March 19, 2008 Report Posted March 19, 2008 Other than the already mentioned lettering and the fact that it is sealed, it looks purty. Quote BigPimpin91's Banging Music
Tub Asko Posted March 19, 2008 Report Posted March 19, 2008 wouldnt i have to do that with the vinal on anywayz?i mean i dont know how they did this get a hold of someone that can right Quote Facebook Youtube Murdered '07 Silverado
LoudBlazer Posted March 19, 2008 Report Posted March 19, 2008 Nice! id of passsed on the lettering. Those D1s should get pretty loud! I had 3 10s and 600 watts and it would bang on alot of ppl in orlando Quote 1997 2 Door Blazer Bagged & Body Dropped SBC/TH350
comptanthug Posted March 19, 2008 Author Report Posted March 19, 2008 get a hold of someone that can right urs look skinner mine are about half a inch thick..i liek urs Quote
comptanthug Posted March 19, 2008 Author Report Posted March 19, 2008 Nice! id of passsed on the lettering. Those D1s should get pretty loud! I had 3 10s and 600 watts and it would bang on alot of ppl in orlando can they really get loud i still cant get um all the way up though ui need a new amp Quote
reinke Posted March 19, 2008 Report Posted March 19, 2008 wouldnt i have to do that with the vinal on anywayz?i mean i dont know how they did this no you do it as you wrap each letter. you lay a little vinyl down push and make sure is it secure then move a little at a time Quote ----reference's---- meade916
comptanthug Posted March 19, 2008 Author Report Posted March 19, 2008 no you do it as you wrap each letter. you lay a little vinyl down push and make sure is it secure then move a little at a time how much tdo u think a repair would cost. Quote
Tub Asko Posted March 19, 2008 Report Posted March 19, 2008 how much tdo u think a repair would cost. have to revinyl the whole box . . . which is where most of the cost of your box is at anyways . . . so a good bit Quote Facebook Youtube Murdered '07 Silverado
comptanthug Posted March 19, 2008 Author Report Posted March 19, 2008 have to revinyl the whole box . . . which is where most of the cost of your box is at anyways . . . so a good bit i think that im goin to port the box...but were would the hole go on the top or side??? its goin in the back of an escalade with the 3rd seat still in Quote
reinke Posted March 19, 2008 Report Posted March 19, 2008 have to revinyl the whole box . . . which is where most of the cost of your box is at anyways . . . so a good bit vert true. if you decide to do it again, try it with some scraps first , Quote ----reference's---- meade916
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.