RooKeT Posted June 26, 2014 Report Posted June 26, 2014 Hi my Name is Dennis and i'm from Germany so sorry for my "Speaking".I've just bought one Sundown SA-15 and now i need some Help with the Box.I've allready build some Boxes with my Friends but no one of them has expierence with this Sundown. I will run it on an Atomic AT1500.1D with an Optima RedTop as Starter Batterie and an PurePower 120 Batterie,i think this will be enough for first. My Car is an old supercharged Mercedes Benz S202 C230 (lookin' like this one only with 18" AMG Styling 2),so i want to run the Sundown in a ported Box.The Musik i'm listening is Dubstep,some HipHop/Rap,but most time it's Low Bass. So how much Volume should i use for the Box, i've read from 3.5-3.8Cubic Feet after Displacement so it will be 99-108 Liters in Germany,not really big i think? How Much Portarea and Length should i use?I've got a couple of 6 Inch Aero Port from old Projects,could i use them? Or should i build a rectangular and interchangeabel Port when im going to drag Just for Fun?Plz help,here in Germany no one know's these Woofer right. Greetings Dennis
gr8handogoatness Posted June 26, 2014 Report Posted June 26, 2014 Is the woofer a dual 4 ohm or dual 2 ohm? If it's d2 then I would run a little bit smaller of a box. 3 to 3.5 cft. They can handle plenty of power but I would rather be on the safe side.
TDZ13 Posted June 27, 2014 Report Posted June 27, 2014 If you're gonna be running 1500w daily to an SA i'd definitely run on the smaller side.. Something like 3.5ft3 @ 34hz w/ 12-15in2 of port per ft3 of airspace and be pretty conservative on the gains. 2006 Hyundai Sonata Lx - Alpine CDA-9885 - Rainbow CSX Comps - (2) 12" Sundown Zv4 - Sundown 5K - 4.6ft3 @ 33hz w/ 6" aeros sealed off in trunk - 250a Singer alt, Kinetik 1400, (2) 2400s - 150.4 @ Dash as of now
Guest Posted June 27, 2014 Report Posted June 27, 2014 guten tag all measurements are inches from Joe x. Enclosure Specifications:Fb = 32 HzVb = 3.7 ft^3External Height = 17 inExternal Width = 33 inExternal Depth = 19 inPort Width = 3 1/2 inCut Sheet List:* All Dimensions in Inches.* Wood Thickness is 3/4 for all Parts.External Enclosure Parts:Front = 28 3/4 x 15 1/2Back = 33 x 15 1/2Left & Right Sides:Side 1 = 17 1/2 x 15 1/2Side 2 = 18 1/4 x 15 1/2Top & Bottom = 33 x 19L Port Internal Assembly Parts:Front to Back = 14 x 15 1/2Extension = 11 1/4 x 15 1/2
Recommended Posts
Archived
This topic is now archived and is closed to further replies.