BassDragon Posted August 1, 2014 Report Share Posted August 1, 2014 I'll be doing my first build soon and just want to make sure I have everything I need. I'll be running two 4 ohm DC lvl 2 12's wired in parallel to a 1.2k in the trunk of my tercel. I'll build a box. Imma grab a SHCA 4ga OFC Amp kit, 20sq ft of Damplifier annnnnd.... that seems to be it. Is that all I will need? I have tools and everything, connectors, heatshrink, solder, etc. The DC site recommends an upgraded battery under the hood and a dash mounted voltage meter. I can most likely swing the battery but probably won't grab the meter. How necessary is it? Thanks 1993 Toyota Tercel Two DC Audio Lvl 2 12'sDC 1.2k Link to comment Share on other sites More sharing options...
afrakes Posted August 1, 2014 Report Share Posted August 1, 2014 I'd make the wire kit 1/0, so you don't need to upgrade in the future. But you can have a cheap volt meter for $20, won't be as real time as more spendy options but will keep u in the ballpark of where your voltage is roughly at. Vehicle: 2014 GMC Sierra 2500HD WT Head Unit: Pioneer DEH- Mids/Highs: Focal Integration ISC 165’s (front) Subs/Amps: TBD Link to comment Share on other sites More sharing options...
islandpride684 Posted August 1, 2014 Report Share Posted August 1, 2014 You can go without the meter, it's there to monitor your voltage. Are the subs 10s, 12s, 15s? What headunit are you using? You might want to upgrade your electricals as well, a battery with the big 3 would suffice for your setup. Build Log http://www.stevemeadedesigns.com/board/topic/186921-blk9te-07-yukon-slo-mo-build/page-3?hl=%2Bblk9te#entry2881410 Link to comment Share on other sites More sharing options...
BassDragon Posted August 1, 2014 Author Report Share Posted August 1, 2014 I just went with 4ga becuase the speaker & power terminals on the 1.2k are 4ga. And I just looked at the SMD volt meter for $100+ and decided I should pass it up. I should most likely upgrade the battery while I'm at it. Should I do the Big 3 too or would I be fine? 1993 Toyota Tercel Two DC Audio Lvl 2 12'sDC 1.2k Link to comment Share on other sites More sharing options...
BassDragon Posted August 1, 2014 Author Report Share Posted August 1, 2014 You can go without the meter, it's there to monitor your voltage. Are the subs 10s, 12s, 15s? What headunit are you using? You might want to upgrade your electricals as well, a battery with the big 3 would suffice for your setup. Sorry 12's. HU is a Kenwood KDC-108, has a 2-channel preamp output if thats what you're wondering about. No sub preamp though 1993 Toyota Tercel Two DC Audio Lvl 2 12'sDC 1.2k Link to comment Share on other sites More sharing options...
islandpride684 Posted August 1, 2014 Report Share Posted August 1, 2014 I would do the big 3, and plus they make 1/0 to 4 gauge amp input reducers. Build Log http://www.stevemeadedesigns.com/board/topic/186921-blk9te-07-yukon-slo-mo-build/page-3?hl=%2Bblk9te#entry2881410 Link to comment Share on other sites More sharing options...
islandpride684 Posted August 1, 2014 Report Share Posted August 1, 2014 You can go without the meter, it's there to monitor your voltage. Are the subs 10s, 12s, 15s? What headunit are you using? You might want to upgrade your electricals as well, a battery with the big 3 would suffice for your setup.Sorry 12's. HU is a Kenwood KDC-108, has a 2-channel preamp output if thats what you're wondering about. No sub preamp thoughI saw that you can switch it to subwoofer mode tho... Build Log http://www.stevemeadedesigns.com/board/topic/186921-blk9te-07-yukon-slo-mo-build/page-3?hl=%2Bblk9te#entry2881410 Link to comment Share on other sites More sharing options...
BassDragon Posted August 1, 2014 Author Report Share Posted August 1, 2014 You can go without the meter, it's there to monitor your voltage. Are the subs 10s, 12s, 15s? What headunit are you using? You might want to upgrade your electricals as well, a battery with the big 3 would suffice for your setup.Sorry 12's. HU is a Kenwood KDC-108, has a 2-channel preamp output if thats what you're wondering about. No sub preamp thoughI saw that you can switch it to subwoofer mode tho... I'll fiddle with it on Sat when I get my car back. Is that everything I need really? Amp kit, Big 3, 1/0-4ga, and a somewhat cheapo volt meter? 1993 Toyota Tercel Two DC Audio Lvl 2 12'sDC 1.2k Link to comment Share on other sites More sharing options...
islandpride684 Posted August 1, 2014 Report Share Posted August 1, 2014 That's pretty much the important things you need and whatever you don't have you can always run to your local parts store to grab them.... Build Log http://www.stevemeadedesigns.com/board/topic/186921-blk9te-07-yukon-slo-mo-build/page-3?hl=%2Bblk9te#entry2881410 Link to comment Share on other sites More sharing options...
BassDragon Posted August 1, 2014 Author Report Share Posted August 1, 2014 What gauge wire for the big 3? Im just gonna grab a kit from SHCA while I'm at it. And what's the difference between fused and unfused? 1993 Toyota Tercel Two DC Audio Lvl 2 12'sDC 1.2k Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.