RT5POINT9 Posted December 26, 2014 Report Share Posted December 26, 2014 (This test is done using my own variable, non-reactive, purely resistive load bank ("The Amp Lab") along with an SMD AMM-1, and an SMD DD-1 for tuning. I am using AD-1 40Hz test tracks for all tests. Power is comprised of 3 AGM 12V batteries along with a 40A power supply. Certified tests are performed by tuning the amp with the DD-1 so that when the test track is run it will stop at the point JUST before distortion. Un-certified and Dynamic runs are performed by tuning the amp using the DD-1 for a -10Db overlap. This will run the amp past the point of distortion, but the AMM-1 will stop the test at the point of clipping.) Kicker IX402 - Rated at 120 Watts RMS @ 4-ohm Bridged. I did end up trying it at 2-ohm Dynamic. Didn't want to risk a certified or un-certified test because this was not my amp. Link to comment Share on other sites More sharing options...
RT5POINT9 Posted December 26, 2014 Author Report Share Posted December 26, 2014 Just realized this should probably be in the amplifiers section. Can a mod please move this thread please. My fault, sorry! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.