Soccerballzs Posted February 12, 2016 Report Share Posted February 12, 2016 You may not meet Stock for MECA. Have to check new rules. http://www.stevemeadedesigns.com/board/garage/vehicle/2438-jeep-commander/I Pioneer P99RSAmpere 38002-Ampere 125/44-6.5 inch Hertz HSK XL Mids4-8 inch JL Audio ZR Midwoofer 2-5.25 Satori Mids2-Morel Tweeters, 2 Hertz Milles 3 inch on A pillars2-Hertz Silk tweeters DC Audio Level 5/12 Skyhigh Wire Mechman 320 XS Power D3100MO Funniest Thread of the Year 2013: http://www.stevemead...dy-being-a-pos/ Link to comment Share on other sites More sharing options...
lowcel Posted February 12, 2016 Author Report Share Posted February 12, 2016 You may not meet Stock for MECA. Have to check new rules. I'm going to be competing Street. Only speaker mod is the tweeters in the pillars. The other speakers (other than the subs) are all factory sizes in factory locations. Also, no mods to the dash. Link to comment Share on other sites More sharing options...
lowcel Posted February 13, 2016 Author Report Share Posted February 13, 2016 It's five degrees outside. It's a good day to stay inside and wrap some panels. Link to comment Share on other sites More sharing options...
lowcel Posted February 15, 2016 Author Report Share Posted February 15, 2016 Today was rough, I had to heat up the electrical tape every time I used it. The good news, my drink stayed cold. Hope everyone isn't getting sick of my updates, here is today's progress. Next I started working on the flux capacitor. Link to comment Share on other sites More sharing options...
lowcel Posted February 15, 2016 Author Report Share Posted February 15, 2016 I worked on the car for six or seven hours today and feel like I got very little accomplished. I color coded all of the speaker wires. I then wrapped them in techflex and color coded those. Next I made a box to match the flux capacitor to house the speaker connections and the SMD fan controller. This picture shows the terminal box, it also shows that I covered the flux capacitor and added acrylic. Next job was attaching the grounds. This is prior to techflex. So many wires and so much tech flex... Link to comment Share on other sites More sharing options...
ALPINE408 Posted February 15, 2016 Report Share Posted February 15, 2016 if you have an issue or need to service something how are you going to remove the fuses? Have you ever had your woofers blown? Link to comment Share on other sites More sharing options...
lowcel Posted February 15, 2016 Author Report Share Posted February 15, 2016 if you have an issue or need to service something how are you going to remove the fuses? I'll remove the cover panel and the piece holding the plexiglass. Should take less than a minute. Link to comment Share on other sites More sharing options...
ALPINE408 Posted February 15, 2016 Report Share Posted February 15, 2016 thats A LOOOONG time if something catches fire.... Fuses are suppose to pop first but that does not always happen and that is your fastest power disconnect point unless you have a breaker or fuse under the hood as well Have you ever had your woofers blown? Link to comment Share on other sites More sharing options...
lowcel Posted February 15, 2016 Author Report Share Posted February 15, 2016 thats A LOOOONG time if something catches fire.... Fuses are suppose to pop first but that does not always happen and that is your fastest power disconnect point unless you have a breaker or fuse under the hood as well There will be a fuse under the hood within 18" of the battery. Link to comment Share on other sites More sharing options...
ALPINE408 Posted February 15, 2016 Report Share Posted February 15, 2016 I have that 3 way set on an MS-8 as well be careful my MS-8 randomly decided to blow up a tweeter you can not get replacements from PPI/Soundstream but a decent 3 way indeed I had to cross the MID-BASS fairly high they give good midbass but can't take much power before bottoming out unless I crossed them over in 120+ hz range Have you ever had your woofers blown? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.