Life is an Enigma Posted February 6, 2016 Report Posted February 6, 2016 Who here remembers the JBL GT122D woofer ? To make a long story short I just found four of them I put in my storage back in or around 1999 after 17 years there no cone left in them So I decided to re-cone them. Now here's my question when I checked the voice coil one side is 3.1ohm and the other is 2.7ohm and this is on all four of them and these woofer's are supposed to be dual 4 ohm. so what do you guy's think should I replace the voice coil's also? What they use to look like If it's not hart stopping it not real POWER
Triticum Agricolam Posted February 6, 2016 Report Posted February 6, 2016 When you re-cone the voice coils get replaced any way. "Nothing prevents people from knowing the truth more than the belief they already know it.""Making bass is easy, making music is the hard part."Builds:
Life is an Enigma Posted February 6, 2016 Author Report Posted February 6, 2016 When you re-cone the voice coils get replaced any way. The only bad thing is the coils are a custom order but the cost is not bad about $20.00 a piece with a three week lead time at least the cone and spider are off the shelf parts. If it's not hart stopping it not real POWER
Life is an Enigma Posted February 28, 2016 Author Report Posted February 28, 2016 Baskets all cleaned up. New cone's new spider's (Heavy) new custom dual 4 ohm voice coils. And what it will look like with the dust cap in. Bringing old school woofers back to life If it's not hart stopping it not real POWER
Life is an Enigma Posted March 1, 2016 Author Report Posted March 1, 2016 Two are done two more to go. If it's not hart stopping it not real POWER
Recommended Posts
Archived
This topic is now archived and is closed to further replies.