Sundown E12 Driver

[sundownz]

Pics with the little brother, the E8.

Little more info and preliminary T/S specs:

2" coil x 1.57" winding height

1.57" tall magnet stack

0.5" thick top plate

Gap Venting

Basket Window Venting

Pole Venting

High profile foam surround

Paper cone w/ interlocking poly dust cap

Single spider w/ flat, tied down leads

16mm linear one-way x-max

~25 mm one-way x-mech (travel before damage)

300-watt RMS rated power handling

Basket and motor will be BLACK for production. Chrome was easier for the prototype.

Qes: 0.520

Qms: 4.720

Qts: 0.468

Fs: 32.30 Hz

Vas: 55.63 L

Re: 7.26 ohms

BL: 19.47 N/A

Le: 4.47 mH

Specs w/ Coils in series - D4 nominal coils.

Sealed box specs:

1.5 ft^3 = 0.707 Qtc = 50 Hz F3

1.0 ft^3 = 0.798 Qtc = 52 Hz F3

Ported box specs:

2.5 ft^3 tuned to 30 Hz = 27.5 Hz F3 (flat response)

2.5 ft^3 tuned to 35 hz = 30.0 Hz F3 (output bump above 33 Hz)

T/S specs are on the one I put together by hand, so production will vary slightly I'm sure.

------

Considering offering an intro sale on these for around $100 - how many would be interested?

MSRP will be around $150 - 160 on these when released.

[~digital~bass~]

yummy chrome haha...

[sundownz]

*laughs*

It's a stock basket and they had it in chrome in stock to speed up my prototype

Will defiantly be black for production!

[sundownz]

Rich, aka: stratusrt01, has the prototype E12 right now. He'll be doing some testing on it for me to see if it needs any more changes for production.