Connorcerase Posted September 27, 2018 Report Share Posted September 27, 2018 just when you think you understand something you get bent someone want to give me a hand I have a sae2000d and 2 e10’s dvc 2ohm the sae is a mono block but has 2 channels I wired it like the picture and tried a ohm meter but couldn’t get a solid reading couldn’t attach a image but it’s option 2 (2ohm final is the goal) https://www.the12volt.com/caraudio/subwoofer-wiring-diagrams.asp?Q=2&I=22 instead of combining the two power wires and the negatives I gave them each there own terminal on the amp since it’s internally bridged i don’t know what the final is Link to comment Share on other sites More sharing options...
slowfkncar Posted September 27, 2018 Report Share Posted September 27, 2018 Each D2 woofer in series would be 4 ohms per woofer, since your amp only has 1 output channel it is reading a final load of 2 ohms. Link to comment Share on other sites More sharing options...
Connorcerase Posted September 27, 2018 Author Report Share Posted September 27, 2018 So they should be relatively safe? Link to comment Share on other sites More sharing options...
slowfkncar Posted September 29, 2018 Report Share Posted September 29, 2018 On 9/26/2018 at 2:57 PM, Connorcerase said: So they should be relatively safe? Yes Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.