d@vetech Posted July 9, 2019 Report Share Posted July 9, 2019 So, I have the 2010 version and the 2011 V1.1. Which version is most accurate? Input specs H=14 W=18 D=27.75 . Both of the cut sheets match. Port H=12.5 W=1.75 L=18 Misc .20 displacement , # of extra Baffles 1, Baffle thickness 0.75, port thickness 0.75, common walls 3 2011 2.61 net volume Hz 31.51 2010 2.52 net volume Hz 32.06 I thought i had it figured out but my work computer has Version 2011 and the home computer has 2010. So, which version do i use? What's the difference ? I don't need an extra baffle with version 2011 to achieve the required Net volume and Tuning Freq. I did need the Extra Baffle on version 2010 to achieve the required Net volume and tuning Freq. If this has been discussed before. I apologize. Thank you in advance DaveR Link to comment Share on other sites More sharing options...
d@vetech Posted July 9, 2019 Author Report Share Posted July 9, 2019 Link to comment Share on other sites More sharing options...
d@vetech Posted July 9, 2019 Author Report Share Posted July 9, 2019 Link to comment Share on other sites More sharing options...
Triticum Agricolam Posted July 9, 2019 Report Share Posted July 9, 2019 I would go with the newer version. The difference between the two is in how it calculates the port volume. Keep in mind that a .09 cu ft difference in net volume isn't going to make ANY difference in output. Its just too small to matter. "Nothing prevents people from knowing the truth more than the belief they already know it.""Making bass is easy, making music is the hard part."Builds: Link to comment Share on other sites More sharing options...
d@vetech Posted July 9, 2019 Author Report Share Posted July 9, 2019 5 hours ago, Triticum Agricolam said: I would go with the newer version. The difference between the two is in how it calculates the port volume. Keep in mind that a .09 cu ft difference in net volume isn't going to make ANY difference in output. Its just too small to matter. Thx for the response. I will go with the newer version. I was looking forward to the second baffle and now that i don't need it, i was somewhat let down. I know that.09 isn't much difference , it's just i am a sealed box guy hanging out in a ported world, i don't want to make any mistakes. Yall will look at me funny. I am going to read the whole Torres' box tuning calculator thread as well. i am finding some valuable info in that thread. I am also using your spreadsheet as well. Thank you for your assistance. DaveR Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.