onyx1silverado Posted August 29, 2019 Report Posted August 29, 2019 Is the plc2 a boost knob or an actual gain control. If it’s a gain control, do you set amp with it turned up and adjust the dial on the amp? This would be on a T750X1bd Pioneer AVH-P4200DVD Rockford Fosgate T5001 bd-cp 2 DC level 2 12's Focal Access Components in the front Focal Access Coax in the rear doors Rockford Fosgate Punch Boosted Rail 4 channel rms 4x75 XS Power D3400 under the hood Knuconceptz Ultra Fleks Power & Ground
onyx1silverado Posted August 29, 2019 Author Report Posted August 29, 2019 Or do you set the gains then plug it in and turn it all the way up. This damn question will make my decision on which amp I buy. This or the t1000-1bd Pioneer AVH-P4200DVD Rockford Fosgate T5001 bd-cp 2 DC level 2 12's Focal Access Components in the front Focal Access Coax in the rear doors Rockford Fosgate Punch Boosted Rail 4 channel rms 4x75 XS Power D3400 under the hood Knuconceptz Ultra Fleks Power & Ground
Recommended Posts
Archived
This topic is now archived and is closed to further replies.