etaks_crew Posted May 7, 2008 Report Posted May 7, 2008 http://www.precisionpower.com/subwoofers/PROseries.asp And I was wondering, they have a flat cone area wouldnt that creat less cone area and less air movment or no. There susposed to be 1000rms they are very stiff. They are 4 Ohm( Thought you wanted like 2 and 1 Ohm subs ) Any input on this stuff will be much apprecieted
Bass4Lyfe Posted May 8, 2008 Report Posted May 8, 2008 their FS is only 39 and 31 hz ... whatsup with that ...? ~Matthew 1998 Toyota Camry XLE V6 3L (1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm with Shock and Proximity (1) 20% Tint All Around (Gately Audio) (1) 250 Amperage HO Alternator (1) Big 3 Done In 1/0 (2) Kinetik HC2400 Power Cell (1) Alpine IVA-D106 Receiver (1) Peripheral Video Bypass Device (4) Alpine SPS-17C2 Speakers (1) Alpine KCE-422i iPod Control Interface (4) Sheets Dynamat Extreme; for speakers (1) 10 Square Feet Hushmat (Trunk & Rear Deck) (4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils (1) Wall Built By David, Tuned to 32 Hz (1) Rockford Fosgate T40001bd Amplifier (1) Stinger 1/0 Wiring (2 runs of + 2 runs of -) (1) Stinger Volt Meter
Shibby Posted May 8, 2008 Report Posted May 8, 2008 The ohms of the sub dont really mean anything unless you are picking out an amp. If you have two then you can get down to 1 ohm at the amp
etaks_crew Posted May 9, 2008 Author Report Posted May 9, 2008 Last bump. so no one noes anything about them?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.