knockmeout Posted December 8, 2021 Report Share Posted December 8, 2021 Never had this issue before but when setting the gains. When I go to over lap and switch tracks, the reading starts at 8db, meaning if I wanted to set to 5db, I'd have to go backwards on the amp gain. I ended up just using it like the original DD1 by using a -5db tone to set it. Pls help, can't figure out what's happening Quote Link to comment Share on other sites More sharing options...
Never Enough Bass Posted December 8, 2021 Report Share Posted December 8, 2021 It's cause your going up past the point of clipping on the gain before you hit read and change track slowly go back down to before clipping then go back up to the point of distortion then hit read and change track 1 Quote 06 Charger Pioneer double din Pioneer 6.5 and 6×9's Knukoncept Krystal kable rca's 0 ga knukoncept kolossus wire Big 3 same wire ^ 1 run 8g karma ss speaker wire Sundown sia 3500d at 1ohm 2 Sundown U series 12's Duralast platinum agm H7 (Main) Xs power d3400 Trying to find a ho alt Link to comment Share on other sites More sharing options...
knockmeout Posted December 8, 2021 Author Report Share Posted December 8, 2021 (edited) But shouldn't the setting with 5db overlap be the same with the -5db test tone from the original DD1 cd be the same? I got to put the gain much higher with the -5db tone. By going backwards on the amp gain because of the 8db start, I was almost at the minimum on the gain. Thanks for the response. Edited December 8, 2021 by knockmeout Quote Link to comment Share on other sites More sharing options...
Never Enough Bass Posted December 8, 2021 Report Share Posted December 8, 2021 I'm not sure but when I did mine with the dd-1+ when I switched over to overlap I was at +2 db to begin with I even watched the multimeter to make sure I was in the right voltage area 2 Quote 06 Charger Pioneer double din Pioneer 6.5 and 6×9's Knukoncept Krystal kable rca's 0 ga knukoncept kolossus wire Big 3 same wire ^ 1 run 8g karma ss speaker wire Sundown sia 3500d at 1ohm 2 Sundown U series 12's Duralast platinum agm H7 (Main) Xs power d3400 Trying to find a ho alt Link to comment Share on other sites More sharing options...
knockmeout Posted December 8, 2021 Author Report Share Posted December 8, 2021 2 hours ago, Never Enough Bass said: 49 minutes ago, Never Enough Bass said: Mine always did that too, starts with 2db on overlap, that's why I was stumped with the 8db that showed today. Hopefully someone has an idea, hopefully my dd1+ isn't broken Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.