2 12" Typr R's

[99explorer]

What is the best way to wire 2 type r's, so that the amp sees a 2ohm load. they are the 2006 dual 2ohm type r's.

[VtecDomani]

series the coils on each sub to give you a 4 ohm load for each sub then parallel the subs to see a 2 ohm load.

[99explorer]

thanks. is there anyway u can sketch it out real quick? or would it be easier to wire em to 1 ohm.

[VtecDomani]

pretty crap drawing but here u go

[techaninna]

2 DVC drivers with Voice Coils in Series / Parallel

Connecting the two voice coils of each driver in series (+ to -) and the drivers themselves in parallel (+ to +, etc.) will result in the following impedances:

Dual-6 Ohm Subwoofers: 6 Ohms

Dual-4 Ohm Subwoofer: 4 Ohms

Dual-2 Ohm Subwoofer: 2 Ohms

Dual-1.5 Ohm Subwoofer: 1.5 Ohms

2 DVC drivers with Voice Coils in Parallel / Parallel

Connecting the voice coils of each driver in parallel (+ to +, - to -) and the drivers themselves in parallel (+ to +, etc.) will result in the following impedances:

Dual-6 Ohm Subwoofers: 1.5 Ohms

Dual-4 Ohm Subwoofers: 1 Ohm

Dual-2 Ohm Subwoofers: 0.5 Ohm

Dual-1.5 Ohm Subwoofer: 0.38 Ohms

Here: http://mobile.jlaudio.com/support_pages.php?page_id=161

[A&W ROOTBEER]

http://www.rockfordfosgate.com/rftech/woof...mp;woofer_imp=3

[99explorer]

thanks everyone. ima try and post up some pics of the build im doin.